Are there somebody who know how to enter radio code in Nissan Navara D40 ST 2007? I have already got code at Nissan. But I don't know how to put it. So,, I'm waiting for 1 year... Please..... Tell me.

SOURCE: I have entered incorrect radio code for my 01'

leave the radio on for a few days, with the wait displaying, it will display CODE after a few days, 2 - 3 days, then enter the correct code , everytime u enter a wrong code the time increases.

SOURCE: Resetting Radio with WAIT on an 01' Ml 320

hi,,you can not enter your code while wait is on,try to put your ignition on one position,wait maybe 3 to 6 hours to disappear the wait on display,then try to enter the code with guidance of manual,ty

SOURCE: wiring towbar electrics for nissan navara d40

The best, and in fact the only recommended solution is to use a plug-in dedicated wiring kit for this car, it plugs into a grey connector on the chassis on the rear of the left hand side. this is the connector that the cars rear light loom is plugged into and the towbar loom piggybacks onto this using the same watertight sealed connectors. There is a trailer indicator warning light already built into the dash display so no need for any other monitoring of the trailer functions. This wiring kit should cost you around £40-£50 and will only take around 10mins to fit. The other alternative is to solder the towbar wires to the cars loom, but this is time consuming and may invalidate the vehicles warranty.

SOURCE: Hi we bought a Nissa Navara 2008 D40 4wd dual cab,

are you sure the correct amount of oil is in it? if over full the engine is trying to drag the crank shaft through the oil

SOURCE: nissan navara d40 drinking diesel

a stuck EGR valve, dyno the vehicle and fix the EGR, (exhaust gas temp dropped from 650deg due to exhaust gasses constantly being fed back through the engine to 480). Fuel economy back is to normal.