Door handle broken off. How do i open the door?

You would need to take the pannel off to get to the internal part of the mechanism. Something has broken or come apart in the opening mechanism. I'd let it go if considering replacing.

Hi Paul, I'm glad to help! Most problems with door handles that won't open the door is broken parts inside the door. Pull the door panel off and move the handle while watching inside the door to see what is broken. Once you've found the broken part, simply replace it. Hope this helps and have an awesome day Paul.

Get a replacement handle REmove door trim to get to the retaining bolts holding the old door handle in place. Replace and reassemble in reverse

door handle broke depends on what door handle it is.if door cant be open on out side out side door handle broke.if cant open door on inside inside door handle broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in place.

The relay rod inside the door has broken (not likely), one of the retaining clips that hold it in place are broken (most likely) or the tab on the door handle assembly is broken (again not likely). to gain access you will have to remove the door panel. You did not say whether the handle you are having a problem with is the interior or exterior but to remove the door panel you will need to have the door open, you might want to purchase a Haynes or Chilton manual for your car to get the proper instruction if you have never removed one before.

The outside door handle may be broken or may have become disconnected from the rod that allows the door to open. Sometimes the ther is a plastic clip that connects the rod to the door handle and could be broken any parts store will have replacement clips. Whatever the problem is, the door panel will have to be removed to be able to inspect the condition of the door handle and parts attaching to it.

check the door handle in side door panel there is a rod that goes into the door handle that might have fallen out of it or more likely broken the door handles at a junk yard are about 5 dollars if you take off make sure it function that none of the teeth of the handle are broken and and make sure you have the right or left door handle it will be marked on inside of interior door handle . this handle slides forward towards the front of vehicle for removal then turn to remove rod from handle.

you latch mechanism could be broken or came apart, common to any vehicle.. open the cover to the back and you will see the locking mechanism, once the rear cover open you can find the latch and open it form the inside. once you get the door open you can play with the door handle by pulling on it like you opening the door and you can observed what actually connect to what to operate the latch. if small rod attached from the door handle to the lock could pop off or broken. may have to replace the handle, depend if its broken or came apart. should be 30 buck for the new handle if needed..hope that help some..good luck

You need to open the door to remove the handle, ask a locksmith to open it with a 'slim jim' then once it is open you can remove the broken handle assembly. Once removed you can see what you need to replace.

check handle is ok or broke
check behind handle shaft if it is came out from- handle point