I have a 2004 chevy venture. The power locks do not work. I can unlock it, but not lock it. Any ideas what the problem is and how much it will cost to fix? My friend's dad owns a body shop. He replaced the computer, but that didn't fix the problem.
Open the door and look on the side of door for little switch up and down ,it a safety switch ,little gray lever sticking out on the side of doors, move it up or down ,read decal on the door jam,hope to help robert b.
on the passenger side there is a wire harness under the carpet. there is a kick plate that pulls off. pull it off and pull back the carpet it is most likly soaked. mine was (welcome to winters) take the tape off the harness you will find a 2 white together and come out as a single wire and it will be taped. This is the unlock wires for the power locks if unlock is woking leave it alone. there is also 2 blue wires that are the same as the white wires in the same harness these are the wires that control the locking. take the tape off and if the wires are all coroded off strip the wire and slid some sealant shrink wrap over one of the wires solder the wires together and shrink wrap the wires then retape the harness and put everything away .. just finished this about an hour ago .. ton of fun to find the solution
Just looked ans sure enough the white wires were corroded. Put a new splice in and the locks work like new. Thanks.
×
1,490 views
Usually answered in minutes!
×