2005 Mercedes-Benz CLK 320 Logo
Basil Criticos Posted on Mar 16, 2016

Where is the window relay located; - 2005 Mercedes-Benz CLK 320

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where is the power window fuse located in a 2000 Nissan Frontier V6 3.3 L

Power is supplied at all times: ? from 30A fusible link (Letter , located in the fuse and fusible link box) ? to circuit breaker terminal s1 ? through circuit breaker terminal s2 ? to power window relay terminal s5 . With ignition switch in ON or START position, power is supplied: ? through 7.5A fuse [No. located in the fuse block (J/B)] ? to power window relay terminal s2 . Ground is supplied to power window relay terminal s1 : ? through body groundssM68 andsM14 . The power window relay is energized and power is supplied: ? through power window relay terminal s3 ? to main power window and door lock/unlock switch terminal s1 , ? to power window switch RH terminal s4 .

https://www.nicoclub.com/FSM/Frontier/2000.0_Frontier-VG/el.pdf
0helpful
1answer

Rear window defroster fuse location, 2002 Nissan Frontier King Cab

System Description NEEL0216 MODELS WITHOUT POWER DOOR LOCKS NEEL0216S01 The rear window defogger system is controlled by the rear window defogger timer. The rear window defogger operates only for approximately 15 minutes. The rear window defogger switch is integral to the air control. Power is supplied at all times  to rear window defogger relay terminal 5  through 20A fuse [No. 25, located in the fuse block (J/B)]. With the ignition switch in the ON or START position, power is supplied  through 10A fuse [No. 5, located in the fuse block (J/B)]  to rear window defogger relay terminal 1, and  to rear window defogger timer terminal 1. Ground is supplied to air control (rear window defogger switch) terminal 8 and rear window defogger timer terminal 4 through body grounds M14 and M68. With the rear window defogger switch (located in air control) ON, ground is supplied  to rear window defogger timer terminal 3  through air control (rear window defogger switch) terminal 8. Rear window defogger timer terminal 2 then supplies ground to the rear window defogger relay terminal 2. With power and ground supplied, the rear window defogger relay is energized. Power is supplied  through terminal 3 of the rear window defogger relay  to rear window defogger terminal +. Rear window defogger terminal - is grounded through body ground R102. With power and ground supplied, the rear window defogger filaments heat and defog the rear window. When the system is activated, the rear window defogger indicator illuminates in the air control. Power is supplied  from rear window defogger relay terminal 3  to air control (rear window defogger switch) terminal 4. Air control terminal 8 is grounded through body grounds M14 and M68. MODELS WITH POWER DOOR LOCKS NEEL0216S02 The rear window defogger system is controlled by the smart entrance control unit. The rear window defogger operates only for approximately 15 minutes. The rear window defogger switch is integral to the air control. Power is supplied at all times  to rear window defogger relay terminal 5  through 20A fuse [No. 25, located in the fuse block (J/B)] and  to smart entrance control unit terminal 49  through 7.5A fuse [No. 28, located in the fuse block (J/B)]. With the ignition switch in the ON or START position, power is supplied  through 10A fuse [No. 5, located in the fuse block (J/B)]  to rear window defogger relay terminal 1 and  to smart entrance control unit terminal 27. Ground is supplied to air control (rear window defogger switch) terminal 8 and smart entrance control unit terminals 43 and 64 through body grounds M14 and M68. With the rear window defogger switch (located in air control) ON, ground is supplied  to smart entrance control unit terminal 14  through air control (rear window defogger switch) terminal 1. Smart entrance control unit terminal 37 then supplies ground to the rear window defogger relay terminal 2. With power and ground supplied, the rear window defogger relay is energized. Power is supplied  through terminal 3 of the rear window defogger relay  to rear window defogger terminal +.
Rear window defogger terminal - is grounded through body ground R102. With power and ground supplied, the rear window defogger filaments heat and defog the rear window. When the system is activated, the rear window defogger indicator illuminates in the air control. Power is supplied  from rear window defogger relay terminal 3  to air control (rear window defogger switch) terminal 4. Air control (rear window defogger switch) terminal 8 is grounded through body grounds M14 and M68
0helpful
1answer

Where is the Power Windows Fuse in a 2005 Ford Taurus?

It is located in the SJB smart junction box , it's a fuse / relay center / microprocessor ! Fuse # F2.10 30 amp . location -behind left side dash panel . Also check the accessory relay . Top relay left side , same location SJB .
Visual Inspection Chart Mechanical Electrical
  • Door window regulator and motor
  • Door glass top run
  • Door window glass
  • Loose, corroded connectors
  • Circuitry
  • Window control switch
  • Battery junction box (BJB) fuse(s):
    • 1 (60A)
    • 3 (60A)
    • 11 (50A)
  • Smart junction box (SJB) fuse(s):
    • 7 (20A)
    • 27 (10A)
    • 30 (10A)
  • SJB circuit breaker 10 (30A)
  • SJB rear window defrost relay 1
  • Relay center box 1 rear window defrost relay 2
  • Delayed accessory relay
  • Battery saver relay
  • Rear window defrost grid
0helpful
1answer

Where are the relays for the rear windows located?

There is a relay bank under the hood. According to TexasHonda
In the 03-06 models, a single relay provides pax, RR, LR window motor power. Relay is located in the pax Multiplex Control Unit in the pax side foot well. If you have power to the pax side window, relay is probably working.
0helpful
1answer

I have a 2007 caliber. I can't locate the power window relays.

if all but 1 window is working it's not the relay try the switch or the motor each window don't have there own relay
0helpful
1answer

Non of my windows will mgo down where are the window relays

Hello i can assist you.Your window relays a re located under your hood compartment in the relay fuse cluster.You will need to look closely at the cluster relay name and location diagram if not displayed on the cluster cover you might have to refer to the owners manual for specs and diagram.However i recommend testing your fuse for your power windows located in side the cab of the truck.It was my pleasure assisting you in locating your window relay.John
1helpful
1answer

Relay box location. there is a problem with the drivers and pasangers window wont go up or down and the head lights dont work but the side lights will. therefore i think its the hrad lights

Fuse for window regulator (circuit breaker) on 13 position auxiliary relay panel. The wiring connectors are located at the lower left and right side kick panels. The auxiliary relay panel is located above the lower kick panel above the pedals.

Headlight fuse location:
#18 High beam right 10A
#19 High beam left 10A
#20 Low beam right 15A
#21 Low beam left 15A

Daytime running light relay location on upper (auxiliary) relay panel. This are the only ones using relays regarding your question.

From April 1999
Position 7, Relay #173

Through March 1999
Position 8, Relay #173
0helpful
1answer

All 4 windows won't go down

_________________________________
Passenger Compartment Fuse Panel

Fuse Location: 11
Fuse Amp Rating: 10 Amp
Description: Ignition (START) - ON/ACC (window and decklid) relay coil and Police ON/ACC relay coil (Police vehicles only)

_________________________________
Power Distribution Box (Under Hood)

Fuse Location: 304
Fuse Amp Rating: Full ISO Relay
Description: RUN/ACC relay (windows and decklid) (police vehicles only)

Fuse Location: 602
Fuse Amp Rating: 20A Circuit Breaker
Description: RUN/ACC relay feed (windows and decklid) (police vehicles only)
3helpful
2answers

Where is power window control unit located

usually power windows have a relay that sends current to the windows due to the high current flow that the switch can not handle.
So, the switch works through a fuse and when you activate the switch it sends power to the relay. The relay then closes and sends power to the window motor. Look for a relay either in the fuse panel or in the engine compartment fuse/relay ox. check owner manual for location.
Not finding what you are looking for?

359 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...