My main beam and dip lights not working, fuse is ok and bulbs dont look like they have blown

Fuses F15 and F16 are okay?

https://fuse-box.info/peugeot/peugeot-308-t7-2007-2013-fuses

This says it might be the switch. I can't find relays, so the switch is carrying the power (amps) instead of switching it through a relay.

https://www.google.com/search?q=2010+peugeot+308+main+beam+headlights+not+working

https://www.google.com/search?q=2010+peugeot+308+main+beam+headlights+relay+location

....

Is the bulb ok

It's possible the "main" lights elements have burnt out.
I believe it's a single bulb per side with both high and low beam elements inside.
Try replacing a bulb and see what that does.

CHECK FOR LOW/DIPPED BEAM FUSE BLOWN IF OK CHECK BULBS

will probably be the switch then.

might have blown a relay, i believe they are most commonly on the fuseblock under the hood

hello annette from uk you think it may be connection ?? is head light not working on dipped beam? but high beam ok ? if so it may well be the low beam element in h/light bulb has blown however you could also check the fuse as each side head and sidelights have their own fuse check handbook for position of fusein box if ok then you can try the other head light bulb from other side into the plug connector of drivers side and if this works on high+low beams ? your old bulb is blown feel sure you can do these checks !? approx price of new bulb in uk £4 -50 but carry out above checks !st b 4 you buy bulb ? if it is a bad connection on plug ? another bulb will have same problem hope you understand all above ? and wish you good luck from n/west uk

Probably not, the fog lamp relay works off the dip beam power, is there a relay for the dip beams?

hi this may be the dip beam element blown ie bulb req's renew? or check the fuses l/h dipped beam as each h/light has seperate fuses for both dip and main beams CHECK BULB 1ST ?

Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.