What is making my stabilitrak light staying on

Probably a sensor. I would just drive it.

Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox

Jul 9, 2012 - Service Stabilitrak, Traction Control lights ON, alone with check engine light. ... 2007 Chevy Equinox LT FWD 2007 Saturn Ion 2 Quad Coupe ... HELP - Service Stabilitrak & Service Traction Control
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
Stabilitrak Off Message + lost Power stearing
May 31, 2009
More results from chevroletforum.com

Chevy Equinox Eco, Traction Control and Stabilitrak Systems

? 2:39
https://www.youtube.com/watch?v=15Qj4HzpBz0

Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban

Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...

Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...

StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

why does traction control and stabilitrak light stay on on my 2010 chev impala

You need to first check the brake pads on your car, they may be so low that they are almost metal to metal. Second make sure your caliper is sliding freely on it's attachment bolts. Third check for any leaks of brake fluid. If you know what your doing, fine, if you don't then take your car in for service before you hurt yourself or someone else. Good Luck Friend.

If the system fails to turn on or activate, the StabiliTrak light along with one of the following messages will be displayed on the Driver Information Center (DIC): TRACTION CONTROL OFF, SERVICE TRACTION CONTROL, STABILITRAK OFF, SERVICE STABILITRAK. If these DIC messages appear, make sure the StabiliTrak system has not been turned off using the StabiliTrak on/off button. Then turn the steering wheel clockwise from the nine o'clock position to the three o'clock position. If this clears the message(s), the vehicle does not need servicing. If this does not clear the message(s), then turn the vehicle off, wait 15 seconds, and then turn it back on again to reset the system. If any of these messages still appear on the DIC, the vehicle should be taken in for service.

Hi there:

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.


Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.


When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.


When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.


You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.


Hope this helps.

Hello: To determine the cause for the light coming on, you will have to have the system codes read to determine, then diagnose the condition so you can repair it.

{: ) A car swerving light on the instrument cluster is the StabiTrak indicator, sometimes called the traction control indicator. A wrench beside it tells it requires servicing.

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.
Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.
When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.
When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.
You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.