How to get your key out of the ignition if it gets stuck ...
? 1:21
https://www.youtube.com/watch?v=bctxs0Yj4Wc
Oct 24, 2012 - Uploaded by stanley saintlouis
How to get your key out of the ignition if it gets stuck! ... Chevy Impala Monte Carlo Buick Pontiac - Won't Shift ...
Key Stuck in the Ignition ' Here's What to Do
locksmith-orlando.org/key-stuck-ignition-heres/
Nov 3, 2014 - One of the most stressful moments as a driver is when your Key Stuck inthe Ignition and you are in a hurry. You can't simply leave your key in ...
Pontiac Grand Prix Questions - when I put my car in park it ...
www.cargurus.com > Questions > Pontiac > Grand Prix
CarGurusJul 28, 2013 - She put the actual key in the ignition and almost could pull it out. She called ... ignition stuck in an on position stering column locked 1 answer.
key stuck in ignition? ' Yahoo Answers
how do i fix my turn signal/blinker? - CarGuruswww.cargurus.com > Questions > Dodge > Ram 1500CarGurusMay 3, 2013 - My right rear turn signal is not working. ... Thanks for the input. just parked my truck for the night and realized the hazard light does not flash on ...Clearlake is the poorest place to live in California...we don't have pavement or ...GM Turn Signal Problem Fix - Directional Relay ... - YouTube? 5:38https://www.youtube.com/watch?v=y4QVUBVVVpIMay 3, 2014 - Uploaded by Steve O+Steve O I just change my turn signal switch it was workingthen it stop. ... store to see or can you help I'm having all those problem you said with my truck. .... leds all the ambers flash at the same time when I hit the left or right.
Key Stuck in the Ignition Heres What to Do
One of the most stressful moments as...
when put my car in park it doesn want to unlock the...
when put my car in park it doesn...
SOURCE: LEFT TRAILER TURN SIGNAL DOES NOT WORK
I'd get a 12vdc test light if you don't have one already & start from plug, and keep probing back from there. It may be as simple as a bad connection under truck where joined into harness.
SOURCE: 2001 Dodge Ram 2500, no running lights on trailer
The truck is protecting itself from the load impose by the trailer.. Chk the plug on the truck for wire gauge size. Turn any electrical loads off on the trailer, any and all. If fuse still blows then the fuse is either underated or the trailer has a dead short. In fact turn trail main power panel of. All lights work you say. So ck the inverter for defect byturning off the inverter on one of the trailers.
SOURCE: 09 Silverado LS no trailer clearance lights
make sure the ground wire is hooked up, i've seen many trailers where the ground wire just hangs, then your relying on the ground to work between the ball and the hitch, not typically a good ground.
SOURCE: No trailer right turn signal or brake light
Hey Boon,
The pinouts for a 7-way plug are as follows:
Seven wire Trailer plugs:
Horse, stock or utility trailers:
White = Ground - 1
Blue = Electric Brakes - 2
Brown = Tail and clearance lights - 3
Black = Battery, aux power - 4
Yellow = Left turn/Brake - 5
Green = Right turn Brake - 6
Orange or Purple (not both) = Auxilliary or Reverse - 7
Recreational Vehicle:
White = Ground - 1
Blue = Electric Brakes - 2
Green = Tail and clearance lights - 3
Black = Battery, aux power - 4
Red = Left turn/Brake - 5
Brown = Right turn Brake - 6
Yellow = Auxilliary or Reverse - 7
In both cases 4 is battery and 7 is reverse, aux or not used.
Double check your wiring using these lists as a reference.
Click here for my post on Trailer wiring
This should get us closer to the answer.
Best regards,
Mike
SOURCE: LEFT TRAILER TURN SIGNAL DOES NOT WORK
I have seen once before that the fuse box was bad on a 2003 Dodge 3500. I had power in and nothing out. We had to replace the box. Not cheap! Hope it is simple like a loose connection though. I think I had to pull the inner fender on the drivers side to access the bottom of the fuse box. Pain in the ****, but...
377 views
Usually answered in minutes!
×