2010 Cadillac SRX Logo

Related Topics:

M
Maureen Posted on Jan 08, 2016

Hazard lights won't turn off.

Wouldn't start because it didn't recognize my starter. Now nothing works and the hazard lights won't turn off.

5 Related Answers

Anonymous

  • 640 Answers
  • Posted on May 26, 2008

SOURCE: break / hazard light fuses keep blowing

check both brake lights for moisture getting into them.

Ad

Anonymous

  • 1 Answer
  • Posted on Nov 25, 2009

SOURCE: On my 1997 Cadillac Deville, my hazard lights are

check the flasher maybe it needs some replacement

Anonymous

  • 66 Answers
  • Posted on May 27, 2010

SOURCE: The tail lights and break lights do not work

The light bulbs for the tail lights and brake lights are probably bad. Try replacing them.

Anonymous

  • 2382 Answers
  • Posted on Jan 21, 2011

SOURCE: 12.6 volts in batteryand into

Hi, your Car is equipped with the following devices to prevent inadvertent shifting:
. A/T selector with shift lock. . Key cylinder with interlocked ignition key.
Shift Lock System:
The shift lock system prevents the shift lever from moving to R or D4 from the P position, unless the brake pedal is depressed and the accelerator is in its rest position.
Note: . The shift lever cannot be shifted when the brake pedal and the accelerator are stepped on at the same time. . In case of system malfunction, the shift lever can be released by pushing a key into the release slot near the shift lever.
Key Interlock System:
The ignition key cannot be removed from the ignition switch unless the shift lever is in the P position. When the shift lever is in any position other the P, a solenoid is activated, making it impossible for the key to be removed, until the shift lever is moved to the P position.

Therefore, you need to check for a faulty A/T gear position switch and possibly a faulty steering lock assembly (key interlock switch and key interlock solenoid). Take a test light or multimeter and also check all under-hood and under-dash fuses. These fuses can affect power going to the 8P connector and the interlock control unit. Check for good contact between the connector and socket terminals. If the problem remains, you may want to replace the interlock control unit. These are sophisticated, involved systems that can challenge the best technicians.

johnf1aresti

ARESTI

  • 1152 Answers
  • Posted on Sep 28, 2012

SOURCE: turn indicator lights show parking lights & tail lights don't work

check for any blown bulb or fuse

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the hazard light relay located?

The button is bad. the flasher is in the fuse panel.
0helpful
1answer

Silhouette 1990 where is the turn light flasher ,

you probably replaced the hazard flasher thinking it was the signal flasher as they look the same. look for the other flasher that you didn`t change.
0helpful
2answers

Chrysler Vision hazard light

on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.
0helpful
1answer

2005 Impala, directional signals inoperative. Flashers are working. Replaced the hazard warning switch. Still no directional signals, hazards work. Now, car will not start.Buzzing sound from hazard sw

There is a good possibility that the hazard warning and directional signal lights have nothing to do with the starting or operation of the engine. There are many things that might cause the car to fail to start. The battery must be fully charged, and in good working condition. No corrosion on the terminals. good solid connections. When you turn the key the starter motor should turn the engine over. If that works the carburetor will need gas. If you have gas and spark, the engine should run. Hope that helps.
Turn signals work with the tail lights and parking lights on the front. You should turn on the Head lights and check to see if the tail lights and parking lights come on. You will also want to check to see if the flasher is plugged in. All the light bulbs must be plugged in and working to operate the flasher for the turn signals. good luck
0helpful
1answer

Car is completely dead. jump start didn't work. fuses are ok.only haz. lights working n centr. locking.

check your battery connection and clean any dirt to make a solid connection the car needs alot of power to start. check starter
0helpful
1answer

Turns over wont start... hazard lights turn on while turning over.

If you dont have some anti-theft system or aftermarke alarm, sound like a starter go to bad. Begin here.

Hope this helps.
1helpful
1answer

I changed the fuse as the turn lights and hazard lights were not working but all other light including brake and interior worked. Now the hazard light stays on and I cannot turn it off. can you Help p

if your hazard lights stay on, you may have a problem with the hazard switch on your stearing collum. try moving it back & forth several times, eg. on, off, on, off always ending @ off & see if that works. they do get sticky @ times. your brake lights will work but your turn signals won't work properly with the hazard switch turned on. let me know if problem persists & will see if i can help you more. good luck.
3helpful
2answers

No hazard lights

Check the hazard switch and the connector to hazard switch see if u have the power and earth to hazard switch if there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem
Not finding what you are looking for?

303 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...