At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
to remove you ignition barrel is a simple process you need to remover the steering column covers from around the ignition switch.
there is a small hole located in the ignition barrel you will need to gentle push and hold an Allen key in the hole and rotate the key to the accessories the barrel should be come lose and gentle be pulled out.
please note that if the internal locking mech is not correctly depressed you will not be able to remove the barrel.
also if you have lost you key you will not be ale to remove the ignition barrel and will need to get a lock smith to rplace the whole thing witch can cost from $120 up to $250 depending on the locksmith
If you had an ignition with a security chip key and you replaced it with an ignition that doesn't have that function (I believe it was a gray key in 2000) then your options are 1: replace the ECM or 2: Replace the ignition yet again with the correct ignition type. That security system is built into the ECM and there is no bypass. If that is an after market alarm, not common with this restriction, remove the cut off from the ignition wires or disable the alarm but cutting the power wire.
You will need to remove your ignition coil disconnect battery use proper socket size remove bolts then coil and unplug unit reinstall tighten down bolt and nuts plug coil back in be sure to put ignition wires back in accordance to firing order witch is 1-3-4-2.Now restart engine.
remove mettle key blade from you key, for remove key blade you have to slide lock witch is sitting in top of your key, near the mettle key you can see small sliding switch, remove mettle key, then have a look not in the deep hole witch is mettle key was insert but left of the mettle key remove sliding switch small grow witch is mettle key head ware sitting in, if you have a good look small gray sliding part is there, you have to use mettle key blade to press it and press it backward of key when you press it you can see it's moving, keep that moving part press by mettle key and pull out the key head, then you can see battery in that part witch is came out from key before remove the battery keep in mind negative and positive it have mention on battery replace battery and jest push key head in to the key til lock insert the right way , is this information helped you? please leave a comment.
×