My 1998 hyundai elantra will not go in reverse...any ideas?

SOURCE: change tke hood realase cable in hyundai elantra

Service and Repair Notes HOOD LATCH CABLE REPLACEMENT Remove the following items: Hood release handle. Radiator guard. Hood latch. Wheel guard. Using a clip remover, detach the clips from the body, then remove the hood latch cable (A) from the vehicle. NOTE: Take care not to bend the cable. Installation is the reverse of removal. NOTE: Make sure the hood latch cable is connected properly. Replace any damaged clips.

SOURCE: elantra automatic trans problems

Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there.

SOURCE: 2001 Hyundai elantra. Headlights, electric

check for any circuit brakers near the fuse box, if theres any of them reset them by introducing a paperclip in the small hole and press, you will hear a click.

SOURCE: 1998 Hyundai Elantra wagon shift lock sticks

dear friend-remove the cable from the gearbox,then move the gearshift to see if that is free.if that is free then move the link on the gearbox to see if that is normal.that should give you a idea of were the problem lies.

SOURCE: where is the fuel pump relay located on a 1998

Passenger compartment relay box next the ECM
you will see 5 relay
2 to the left & 1 in the middle & 2 to the right

The one in the middle is the fuel pump relay