Would really like help obtaining radio code for SEZ2Z6Y1583442 aurav3 about only one not listed toledo se 1.9 tdi

see gumtree.com

Check fuel sensor on fuel tank!

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, SRS and BCM faults) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, SRS Supplemental restraint system, BCM Body control module

We do not have this make in the US, so we have no info on it. Sorry

IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Volkswagen Jetta 1.9 TDI radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please do rate my response. Thanks!

hi no there is only the ones on the inside the layout should be like this for your one


1 Country of Origin 1 = United States 2 Make J = Jeep 3 Vehicle Type 4 = MPV 4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs. 5 Vehicle Line Y = Wrangler 4×4 6 Series 1 = Sport
2 = SE
4 = Sahara 7 Body Style 9 = Open body 8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline 9 Check Digit 0 through 9, or X 10 Model Year W = 1998 11 Assembly Plant P = Toledo #2 12-17 Vehicle Build Sequence Six Digit Number

incase the picture did not come out

1 Country of Origin 1 = United States
2 Make J = Jeep
3 Vehicle Type 4 = MPV
4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs.
5 Vehicle Line Y = Wrangler 4×4
6 Series 1 = Sport
2 = SE
4 = Sahara
7 Body Style 9 = Open body
8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline
9 Check Digit 0 through 9, or X
10 Model Year W = 1998
11 Assembly Plant P = Toledo #2
12-17 Vehicle Build Sequence Six Digit Number

hope this helps.

Remove the radio and obtain the radio serial number. send this number and your VIN number to daewoousa.com, and they will send back the 4 digit security code.

Obtain serial number of the unit that is in your vehicle. ( usually on the back of the unit).
Pay a visit to the dealer with the title , registration and serial number of the unit and he will give you the code. Cost $ approx $50 to $75.
If you choose not to remove the radio yourself to obtain the serial number the dealer will do the whole show for you for approx $100.00.
Contact your local dealer prior to showing up .

either the lock mechanism is broke or the vacumn pipe is broke that lead into the door to operate the lock but this is only on older models .That have a pump in the boot

sometimes the previous owner might wrote it down on the owners manual but if not then you need to pull the radio out and get the serial number and call the dealer they will give you a code