What does fault code P0497 mean for Honda Cr-v ?

replace the canister,or there is a vaccuum leak

Both the codes here are engine codes you need to be able to pull ABS codes. P0325 is a knock sensor code and the P0496 is evap purge flow high. These will not cause a ABS or Traction control problems.

Google the code

Type: OBD PO497

Google the code & read up

Type: Honda OBD PO497

have the fault codes read and fix the faults shown

The dealer has the problem that is prominent with this code you will have to referee to code P1457 they are plaque with this P0497 is evap slow leak P1457 is Evap slow leak it TSB 08-016

The Check Engine Light (yellow light) comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system you will seldom feel the car engine run any different, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.

You have to pull the codes, do not guess, waaaaay too expensive...THe purge system bleeds tank fumes into the intake system, for clean burning.... Something (was at least) is worng, pull the codes and proceed.