Question about 2007 Ford Explorer Eddie Bauer

Open Question

I have an Avital installed, I have inadvertently disabled my alarm system by evidently by hitting a sequence of buttons on my key fob. How do I enable the alarm system?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 94 Answers

SOURCE: I have a 1996 ford Explorer with single button on

if its a factory alarm you can not bypass it, it goes through the computer however a one botton alarm is usually an aftermarket starter diable try finding the starter relay if it looks different replace it with a regular relay if its not just a relay you might want to look under the dash for a smaller size box and find the name of the alarm company and look on there website on how to disable it

Posted on Sep 08, 2009

Ad
fixitriteman
  • 431 Answers

SOURCE: how can i disable the anti theft alarm system. my

Call your dealer with prof of ownership they can walk you through it . or call a lock smith , Sorry but for obvious reasons I wont be of any other help on this one. PS hope you can under stand . Thank You .

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my alarm system to chirp instead of beep when it goes off or when I lock my doors with the remote entry key fob?


Check to see if your vehicle honks when you press the "lock" button on your key fob. Press the "lock" button multiple times in a row. Many devices won't beep unless you double-tap the button after locking. If the horn doesn't honk, but the lights flash, your chirp feature is probably disabled.

Use your keyless fob and ignition key to enable the audible chirp. The process varies considerably on different makes and models. You must usually consult your owner's manual, a dealership or the alarm manufacturer for the correct process.

Jan 29, 2015 | 2006 Hyundai Tiburon

2 Answers

Fob still won't work after new battery and nothing wrong with the contact inside, do not hae original code for the Kia sportage 1998 so what is the next best thing ,to do?


When replacing the key fob battery there is no reprogramming required! If the key fob was working prior to the battery replacement then it would point to the contacts not being correct! Remove key fob battery and start again!

Dec 31, 2014 | 1998 Kia Sportage

1 Answer

Since disconnecting the battery on my peugeot expert van my alarm doesn't bleep when I lock the door with the key fob.


On my Civic there was a button on the underside of the key fob that I had to hold to enable/disable the beep when I locked my car. Hope this helps.

Sep 13, 2014 | Cars & Trucks

1 Answer

Why won't my J30t Infiniti start ?


Something has triggered the theft alarm system, and your ignition is disabled.
If you have a key fob, you will need to hit the UNLOCK button. If you do not have a key fob, unlock either of the doors from the outside using the key. If neither of these solve the issue, you will need to have the security system serviced or bypassed.

Aug 13, 2014 | Cars & Trucks

1 Answer

How to turn off the pro alarm


I would start by replacing the FOB. Sounds to like the electronics inside it are bad. The only reason the horns would go off is if you hit the panic button. There is a slight chance the receiver is bad. But Fobs are cheaper to replace than the receivers. If you have two FOBs and they both react the same, then replace the receiver. Or just ditch the system. The keys (in the door locks) should still activate the alarm system.

Aug 07, 2014 | 2011 Chevrolet Silverado 1500

1 Answer

Car alarm goes off when unlocking door


You will needs to think of it this way. Once you set your alarm it is looking for the corresponding signal to disable itself. That comes from the fob. If you don't use the fob and just use the key, the alarm system is doing its job and alerting you since it has not received the disable command from the fob. Either lock the door with the button when you exit the car if you want to use the key or use the alarm fob. This will also happen if you use the car manufacturers fob to unlock the car if you have locked it with the alarm manufacturers fob.

Hope that helps - I have hidden all of my original car fobs to help alleviate this problem!

Dec 29, 2013 | Cars & Trucks

1 Answer

Key fob wont re set on my ssan yan rexton


I recently changed the battery on my key fob for my ssanyong rexton. I then did the following for the key fob to make it work. 1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold both buttons on key fob until red light on fob stays on. Then let go of both buttons. Then pressed the alarm button then the panic button, somthing like that. To be fair the button sequence after the red light came on is a bit vague. The alarm was blaring so i was happy when it just stopped.

May 23, 2012 | SsangYong Rexton Cars & Trucks

1 Answer

Remote key fob no longer opening the doors / disabling the alarm but fob does start the car


Inside the key fob are contacts that get dirty, both the electric side and the push button side, carefully clean them both.

Feb 01, 2018 | 2009 Volvo S40

1 Answer

'98 Saturn SL1 won't start. Alarm system behaving strangely. Have power, turn key-nothing. Then it will start for no reason. Drove it home (20 miles), shut it off and it won't start again. Changed battery...


I had this same exact problem in a family member's Saturn. If you are opening the door with the key and not using the key FOB to unlock the doors, then the security system will not allow you to start the car. You will notice when this happens that the dome light will blink and you'll hear the relay in the BCM clicking.

In order to stop the security system from doing this: Make sure the car is locked with the key fob by hitting the lock button. Then hit the unlock button on the key fob once and then once again (I do it out of habit). Then open the driver side door, put the key in and it should start no problem.

Dec 31, 2009 | 1998 Saturn SL

Not finding what you are looking for?
2007 Ford Explorer Eddie Bauer Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...