SOURCE: Replace/fix starter on 1991 Lexus LS400
Not too bad. Not much room, just enough to drop the starter. It is probably easier to go up through exhaust if you can get your exhaust shield off the manifold .
SOURCE: how do i reset brake ware indicator
The brake wear indicator is a small metal stone-like sensor that attaches to the brake pad. Once the pad wears down to a certain level, it begins wearing into the sensor, breaking the circuit open.
Once the light has come on, the appropriate sensor (front or rear) must be replaced to return functionality.
Factory brake pads usually come with new sensors. Aftermarkets do not, and often have no provisions for attaching them either.
Alternately, you can bypass the brake level sensors by splicing the two wires for the sensor together. You will no longer have brake level warnings if you do this however.
SOURCE: My 91 lexus ls400 stopped firing up. It turns over but no go.
check/change the crank sensor and check your ignition module
210 views
Usually answered in minutes!
×