Hi Ricky, Im AL the owner of Big As Auto Repair.
Ricky, if the high beams work when you hold the lever in, then its the high beam switch NOT the light switch. The lever controls the high and low beams. You need the multi-function switch which is also the dimmer switch. Hope this helps and please visit my auto-repair-website at: http://www.bigasautorepair.com/
SOURCE: 2003 buick lesabre heated seats wont work
I had this problem, but only on the driver's side (with leather seats). Sometimes the switch would come on, but I could not get it to go back off (and the seat would not heat).
I ended up removing the drivers front seat cover (only the bottom part), folding it back from the driver's door to the middle of the car. You also have to unplug the wiring harness underneath the seat. I found a black spot burned in the foam. This is where a wire had broken. I carefully pulled the wire together, then soldered it. I put everything back together, and it has been working ever since (about 6 months - and getting lots of use in the middle of the winter).
I think the only way to replace the heated seat wires is to replace the whole seat cover. I was glad I could fix mine by soldering it.
SOURCE: dodge magnum has lost powre to horn,turn signals,brites,cruise,mi
the body control module has most likely failed, have the dealer test it.
SOURCE: buick lesabre 2000 head lights won't shut off
SOUND LIKE THE DRL RELAY IS STICKING CLOSE.ITS NOT TURNING OFF CIRCUIT LIKE IT SUPPOSE TO.HAS TO BE REPLACE.
SOURCE: headlights both quit working at same time,fuses
If both lights quit working, then either the switch or the fuse is bad.
SOURCE: Headlights quit working, no low or highbeams, only
Could be a short or sensor in the headlight switch causing it to:
a. just not work
or
b. get too hot and melt the contacts until they cool
240 views
Usually answered in minutes!
×