- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sound like the blend door behind the glove box is stuck. My problem that it was stuck in the closed position so I was not getting any heat. I had to take it to the repair shop and they took off the dash to get to it. It was expensive.
It could be the blower resistor. While I'm not familiar with the 2008 Escape, most resistors are located near the blower motor under the dash on the passenger side. It'll have a plug with several wires, and usually 2 screws holding it in.
to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !
×