Holden v6 Ve series 2 , 2010 model auto , after jumpstarting according to manual the IQ system is blank , do i need a new one or can it be reset ? thanks.

In Australia?
ask any shop that does transmissions for help. there.
join a HOLDEN forum down there, we have none in Yankee land.
that transmission is and E box, electronically shifted called a TCM
and that TCM must like any new box.
Only Holden will have answers this complex.
Ask Them?
we are not any kind of Holden forum here.

Unlikely

The VF Commodore was built on an altered version of the Holden designed GM Zeta platform, first used in the VE Commodore. The VF was an evolution of the VE, with several visual changes. The VF featured new styling at the front and rear, with a more modern, sculpted appearance replacing the VE's simpler design.

Holden Commodore (VF) - Wikipedia

https://en.wikipedia.org > wiki > Holden_Commodore_(VF)

History of the Holden Commodore part four: VE-VF models

https://www.whichcar.com.au > features > history-of-th...
May 31, 2018 - It was no secret that after six years, the VE's interior was looking aged, with criticisms around quality on the otherwise well-loved model ...

The fuse box on a 2009 Holden Commodore VE is typically located in one of two places:

Under the hood: The fuse box is usually located on the driver's side of the vehicle, near the firewall. It is a rectangular box with a black or gray plastic cover. You may need to lift the hood to access the fuse box.

Inside the vehicle: On some models, the fuse box is located on the driver's side, under the dashboard. It is usually located to the left of the steering wheel, near the driver's door.

To find the specific fuse that you are looking for, you will need to consult the owner's manual for your vehicle. This will provide a diagram of the fuse box, as well as a list of the fuses and their functions. The manual should also provide instructions on how to check and replace a fuse if necessary.

If you are having difficulty finding the fuse box or identifying the correct fuse, it is recommended that you seek the assistance of a professional mechanic. They will have the experience and knowledge to help you locate the fuse and make any necessary repairs.

dealer for programming

look at the decal under the bonnet

yes possible
will create electronic miss- matches to be sorted

Holden Commodore VZ VE V6 Alloytec Motor Engine HBE engine code AUD 1 250...

best ve commodore owners forum around
https://forums.justcommodores.com.au/forums/ve-holden-commodore-2006-2013.75

The Holden Commodore (VX) is an executive car that was produced by the Australian manufacturer Holden from 2000 to 2002. It was the second iteration of the third generation of this Australian made model. Its range included the luxury variants, Holden Berlina (VX) and Holden Calais (VX), and it formed the basis for a new generation Holden Ute (VU) coup? utility and Holden Monaro (V2) coup?.
The VX series was produced between October 2000 and September 2002, as a minor restyling update to the VT series from 1997. It introduced greater model differentiation along with gains in crash safety. An intermediate Series II was launched in August 2001, featuring a revised suspension system among other changes.

Thanks,

Landon

your VT /VX came out with a V8 engine
you need the engines ECU and the V8 gearbox
manual diff ratios can be optional

1997 -2002 engines will bolt in

you could go up the next commy V8 model it has roller rockers
you can have a v6 or v8 supercharged if you like

once all bolted in you need a mutt 2 diagnostic reader to reset all the keys and modules and immobilizer for it to start and run

http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002

We are a USA site and we do not have this make in the US. Sorry.