At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My windshield washer pump does not work ,pumps are...
Your question is confusing. you say the pump does not work then you say the pumps are working. If the pumps are working then check the washer hose for being plugged as well as the spray nozzles.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the Fluid First, check that the windshield washer bottle has fluid and that ... If the pump is not heard, check the fuse panel to see if there is a blown fuse.
? 10:00
https://www.youtube.com/watch?v=0SdUhyQF4tY
Sep 9, 2012 - Uploaded by RatchetsAnd Wrenches
Here is a step by step guide to diagnose any trouble with yourwindshield washer pump, or other issues that ...
check front washer pump fuse.if fuse okay problem could be washer switch bad use a 12 volts test light see if washer motor getting power if yes washer motor faulty.if no your fuse okay you have open circuit at fuse box to switch.
Check fuse in fuse box inside vehicle,if good,then go to windshield washer pump and disconnect wiring,get meter and check if power is going to pump,if so then pump is at fault,if no power,thenwiring could be short somewhere to fuse box.Also check your washer hoses,that they are not kinked or came loose.Pump could just be loose.
More than likely it's the pump itself. I say this because in a nutshell your pump is computer controled. It receives power through the CAN system on your vehicle. If it were just a fuse MANY other things would not be working. I would see if you are geting power and ground to the pump. If you are then replace the pump. If you are not you may be looking at the switch or a wiring problem or in the system itself. Wish I could give you just a fuse but it's not that simple on your vehicle. I gave you a descrition of how it works but it can be a little confusing.
Then to answer the question you asked:
The washer pump fuse is fuse#6 in the Integrated Power Module at the left front of the engine compartment. It is a 30 Amp fuse. It is the same fuse that runs your windshield wipers.
If your wipers work, the fuse is not blown.
The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.
You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.
I also would double check the fuses and any relays related to the washer pump.
Finally, I would check the washer switch if you replace the pump and still is not working .
×