How do I fix the passeb=nger side door window and lock?
Passenger side window does not work and neither does the passenger side door lock. I tried to lock the passenger side door with the driver side button but that didn't work either.
ok we ended up unhooking the batteries and waiting 10 seconds then re hooking them back up to reset things and that worked , everything is now working as it was before. easy fix!ok we ended up unhooking the batteries and waiting 10 seconds then re hooking them back up to reset things and that worked , everything is now working as it was before. easy fix!
You can't post conmments that contain an email address.
checked fuses and they are ok, will look at the wiring but don't think that is a problemchecked fuses and they are ok, will look at the wiring but don't think that is a problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the main wiring loom into the door has been damaged.
Check near the hinges, where the door swings, to see if any damaged wires. Does the door lock and unlock from the drivers side switch?
Try unplugging the passenger door module from the wiring harness. Module may be bad. I see one screw holding it with tabs at the other end. You should be able to pull it up without removing the door panel. I see there are modules online for less than $40.
Sometimes the harness at the front door will get a wire break in it. Try working the window switch on the passenger front door (ignition on of course) while slowly moving the door open and closed. If it starts to work, Jeep has repair kits still I believe where you can replace just the harness between the body a-pillar and door.
try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.
ok we ended up unhooking the batteries and waiting 10 seconds then re hooking them back up to reset things and that worked , everything is now working as it was before. easy fix!
×