Nissan UD 1400 1994 model td2t
SOURCE: timing diesel fuel pump
hi
first remove the timing cover afer remove also remove the crankshaft pully.
now you can see timing belt clearly next remove the valve cover to see valves.
Rotate the engine by hand you can see where you remove the engine bully key grove that key should be top side while you rotating the engine there is mark like -- on the cover behand where you remove the pully so that mark and the crank shark key should in lined.
after that look the injection pump pully you can see front side mark --- look the engine direct behand the bully you can see mark that two mark should be in line have look the engine valves first cylinder should be close and the 4cylinser exhaust valve open.
i thing that will help you.
dont worry this language is my second language.if i make any mistake how i typing.
SOURCE: I have a 1987 F350
take the shut off valve out of the injector pump and inside the valve is a round metal body with a rubber seal on the end ,check this seal hasnt swollen and stuck ,also check inside the primary fuel filter for any transparant pieces or crystal ,this is a problem i have been getting of late with people putting this bio fuel into the tank ,it causes this crystal stuff and it damages the injector pump as it passes through the filters and solidifies in the injector pump and kills them.just though before you start pulling it apart crack off a couple of injector pipes and get assistant to crank engine throttle wide open and see if its pumping fuel first this will give you some idea what to look for ,leave this answer in your e mail box so you can get back to me later after having a look ,but please remember the time zone difference
thew timing marks for vanette cargo are on the timing belt u carnt go wrong
SOURCE: 1993 turbo diesel rodeo. won't start,
replace the fuell filter and any flexible fuel hose after the pump
450 views
Usually answered in minutes!
×