SOURCE: Hi!Where is the OBD2 connector located on 1992 mit
drivers side at the bottom of the dash plastic look down by the floor where the dash ends it should be right in that area
SOURCE: how to change the timing belt on a 2002 Mit.
That is a very long answer............Get a repair manual........Not an easy belt to change....
SOURCE: whaqt type of oil used the transmision fluid? auto trans.2001 mit
DIAMOND ATF SP III or equivalent
SOURCE: I have a Mit. Montero Sport 1999
Your code is 4886.
Use preset button 1 to scroll through the first digit, preset button 2 for the second digit, etc.
Once the correct code is displayed, push the unlock button to unlock the radio. The unlock button varies between models, but it is always either CD, AM/FM, or TAPE. There is no penalty for pushing the wrong one as long as your code is correct.
SOURCE: how do you tighten ac compr belt on mit montero sport xls 3.5?
on the engine between the a/c compressor and crank pulley is adjusting pulley its above both of them in the middle loosen the 14mm nut on front of the pulley and turn the 12mm adjusting bolt clockwise until the belt is tight but not too tight if it continues to squeal just replace the belt you do not have to take any other belts off to replace
73 views
Usually answered in minutes!
×