Need unlock code for radio

Step 1: Look at your radio. Check and see if the code "RDS" is written on the face of the radio. If "RDS" is present, contact a GM dealership to have your radio unlocked by them.
Step 2: Check for the identification code. Press buttons 2 and 3 for 8-10 seconds. If a code does not appear on the display, you won't be able to unlock your radio in this manner.
[If that doesn't work vvv]
In order to obtain your radio unlock code, you need to find your radio's serial number. You can get the radio serial number directly from your radio.
Step 1: Turn on the ignition. Turn the key to "accessory" mode or "on" mode.
Step 2: Turn on the radio. Press the power button to turn on the radio.
If your radio displays any functions such as playing a CD, cassette, or a radio station, your radio is not locked. If no sound is heard, you may need to replace your radio unit.
If your radio is locked, "LOC" is displayed on the screen.
If "INOP" is displayed, keep your ignition on for 60 minutes with "INOP" on the display. After the hour is up, it should change to "LOC." After this you can proceed with the next step.
Step 3: Write down the code. Press buttons 2 and 3 at the same time and hold for 8-10 seconds. Write down the three-digit code that is displayed.
Step 4: Note down the code. Immediately press the AM/FM button. Another three-digit code is displayed. Write it down as well.
This is your six-digit radio serial number.

Now that you have your radio's serial number, you can obtain the radio unlock code from General Motors. Be ready with a pen and paper to write down your radio unlock code.
Step 1: Contact the GM radio hotline. From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140.
Step 2: Enter the code. When it requests a code, enter "106010" on the keypad, followed by the pound (#) sign.
Step 3: Enter the radio serial number. You will be prompted to enter the radio serial number you have just obtained.
At the prompt, enter the number followed by the pound sign.
Step 4: Write down the radio unlock code. The prompt will read out your four-digit radio unlock code. Write it down precisely.

Now that you've obtained your Chevrolet radio unlock code, you need to enter it into your radio.
Step 1: Switch on the radio. Turn your ignition on and press the radio power button. Your radio will display "LOC."
Step 2: Enter the first two digits of the radio unlock code. Press the hour button on the radio to enter the first two numbers of your radio unlock code.
Continue pressing the button repeatedly until the first two digits of the radio unlock code are displayed.
Step 3: Enter the last two digits of the unlock code. Press the minute button until the last two numbers of the radio unlock code are displayed.
Repeatedly press until they match the two digits you need.
Step 4: Confirm the code. When the code matches, press the AM/FM button. "SEC" will display on the radio, indicating a successful attempt to enter your radio code.
If you enter the code incorrectly eight times, the display will switch from "LOC" to "INOP." You'll need to leave the ignition on for an hour as described in Part 2 before you can retry.
Write the radio unlock code in a safe place such as in your owner's manual for future use.
Most car dealers will charge you a lot of money just to get the code for you. If you follow the right steps, you can get the code for free and be able to start listening to the radio again in just a few minutes!
How to Unlock Chevrolet Theftlock Radio

Call dealer ask for service and tell them the battery was disconnected and you need the radio code again they should find it with no problem through the vin number

just the internal display.
that means radio is bed. if sound holds and stations hold and sound good.
my gosh, both died same day?
check fuses first. as always for ever and ever.

try to say what works good or bad on the radio in all modes.
all modes. Am/fm cd or ? usb port, if optied
is radio stock? oem original, lock box stock.?

Unless somebody wrote the code down in your owners manual, you will have to take it to the dealer. They will push a series of buttons, get a code out of the radio, then call the factory to get the unlock code. I'm sure there is an associated fee involved.

1.) To begin, if your radio is displays LOC, then proceed to step 2. If your radio says INOP, then turn your ignition to the RUN position, and turn the radio ON. You must leave it like this for a minimum of 1 hour (not 59 minutes) to clear the INOP message. I would wait 1 1/2 hours just in case doing it too early causes the timer to start over.

2.) Turn your ignition to RUN (if not already), and your radio to OFF. Press and hold preset buttons 2 and 3 for around 5-10 seconds to obtain a scrambled version of your radio's original factory set code.

3.) Call a GM dealer with this code. Tell them you are with a local shop i.e. I am Joe with Good Year Highway Tire; Then tell them: We have a 2000 Saturn SL we just changed a battery in and the radio is now locked. My mechanic pulled the pre-code. Could you give me the code? This usally works at no charge.

Once you have the code write it down. Keep atleast 2 copies. Hope this helps!

Hello,

The best possible thing I could advise you to do would be this. Sometimes they can do it over the phone. Tell them that you are having issues with your radio being locked. Usually they can look up by your VIN number and get you your unlock code. Otherwise you will have to take it to the dealer and have them hook up their vehicle scanner (Tech-2) and they will be able to fix it. Everyone on the internet has their own secret ways about how to obtain these codes, but with it comes to GM the best way is to take it to a dealer.

Good Luck!

take you vin number to amitsubishi dealer if its the orignal radio he will be able to get it for y

well the only way to unlock the radio is this,,,there is a 4 digit code stored in the radio you need to get it from the radio,you must press and hold radio preset buttons 1 and 2 for 5 seconds and then a 4 digit code will appear,write down that code and respond to me so i can get you the unlock code,,only dealers can get the unlock code,i need to call saturn with that code thats in the radio to get you the unlock code,and then you enter the unlock code and you good to go,,,or you can take it to saturn and they may or may not do it for you for free,,but if you want just get back to me with the unlock code

if you do not have original anti-theft radio code you will need to remove radio and retrieve s/n off of radio. once you have that you can go into nearest honda dealer and with s/n they can give you correct radio code

Contact the dealer but ask for "parts department" and they will give you a step by step on how to unlock it and get the scramble code.