Trying to replace a radio in an Nissan Almera n16 (2003), I Is it possible to replace this radio, or because the dash radio/Air-con is all the one?

which year

looks like all the radios need some slid down each side of the radio
that releases clips to extract the factory radio


Nissan Almera radio fit

2004 Nissan Almera Workshop Repair Service Manual PDF Download


get your car fix right now

Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link. 2006 Nissan Almera Workshop Repair Service Manual PDF Download

one switch will do the job

Hi Jan, The codes are anti theft devices and are unique to each vehicle. If it is not recorded in the user manual (maybe a separate manual for the radio) ask your dealer for it. Regards and happy new year John

That noise is the heater and AC air temperature control electric blend door motor trying to move a duct door that is sticking due to heat warping. You will need to remove the entire dash assembly and replace the blend door. This door is located between the AC core and the heater core and "blends" the air from each (hot from heater core and cold from AC core) to give the desired air temperature,.

Yes thay Are shod be no the side of the dash

It may be low on refrigerant if the pressures are to low, the compressor will not engage.

it is positioned in the very centre of the dash board, behind the radio/Air con unit, it is bolted to the floor, you will need to remove the dash board and possibly the air con unit to access. once the module and air bags have been replaced it shouldnt need anything else.

yes as long as it fits the dash, you can also buy an adapter wiring harness from a auto stereo shop that plugs into your factory wiring and the aftermarket radio, no cutting wires.