At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
IT IS LOCATED INSIDE THE WINDSHIELD COWL. DIRECTLY BELOW YOUR WINDSHIELD UNDERNEATH THE THAT PLASTIC THAT LOOKS LIKE A NET. U HAVE TO REMOVE WIPER ARMS BEFORE REMOVING COWL
It is located under the hood just in front of the windshield on the firewall. You need to remove the plastic grill that covers the wiper assembly & remove the appropriate hardware holding the wiper motor in place. Good luck!
usually they are located on outside of windshield on bottom of the outer windshield moldings must remove to see wiper motor hidden under black moldings with pop buttons
Turn wipers on (veh in "on" or "acc" position)
Disconnect the electrical connection at the windshield wiper motor (located in the engine compartment on the fire wall) and check for voltage. If you have voltage, there is a good possibility your windshield wiper motor is bad.
You may also: Disconnect the electrical connection at the windshield motor and run a heavy gauge wire directly from the positive side of the battery to the motor. If you get the windshield motor to come on. There may be only a wiring (short) problem between the relay and the motor.
Let me
The motor for the wipers is located inside the windshield frame. you need to un hook the frame from top and remove bolts holding windshield frame up and fold windshield down. access doors on bottom of frame.
Nope, but you have to position the linkage in just the right position so that it will clear the windshield glass and the brackets that are located below the windshield. Thanks, rich
Windshield Wipers Continue to Run When Turn Signal and Windshield Wiper Switch Are Turned OFF
Damaged turn signal and windshield wiper switch .
Damaged windshield wiper motor .
Damaged windshield wiper control module.
Pin Number
Circuit
Circuit Function
1
57 (BK)
Wiper Motor Ground (Park)
2
28 (BK/PK)
Wiper Module to Wiper Motor (Park Switch)
3
65 (DG)
Wiper Motor Power (Park Feed)
4
61 (Y/R)
Wiper Motor Common (RUN)
5
56 (DB/O)
Wiper Motor LO
6
58 (W)
Wiper Motor HI
Windshield Wiper System
The windshield wiper system consists of :
Windshield wiper motor (17508) (F-type).
Washer system.
Windshield wiper control module.
Turn signal and windshield wiper switch (13K359).
The windshield wiper control module is:
Located at the instrument panel fuse panel.
The windshield wiper motor is:
Attached to the cowl top extension (021A36) .
Connected to windshield wiper mounting arm and pivot shaft (17566) .
The turn signal and windshield wiper switch features a:
Rotary wiper switch.
Push type washer actuator.
OFF/Low/High Speed
Has a two-speed, permanent magnet, three brush electric windshield wiper motor .
The windshield wiper motor has a brush rigging that permits selection of low or high speed.
When the turn signal and windshield wiper switch is in the LO position, the common brush and the blue/orange wire brush are used, and the windshield wiper motor operates at low speed.
When the turn signal and windshield wiper switch is in the HI position, the common brush and the white wire brush are used.
In HI position, electric current will bypass a portion of the armature winding causing the windshield wiper motor to operate faster.
When the turn signal and windshield wiper switch is moved to the OFF position, the windshield wiper motor will continue at low speed until the park switch outer contacts open.
When the park switch contacts open, the windshield wiper motor stops in the park position.
Interval
When the turn signal and windshield wiper switch is in the interval position:
The wipers make single wipes separated by pauses.
The rotary switch is on the end of turn signal and windshield wiper switch .
The length of the pause can be set from approximately 1 to 17 seconds.
Length of pause decreases as the rotary switch is rotated away from off.
Length of pause increases as the rotary switch is rotated toward off.
While in the interval wiper mode:
It is normal to hear a slight click at the beginning of each on/pause cycle.
NOTE: When using interval wipers, the first wipe may not occur until after a pause of up to 17 seconds.
most of these windshield wiper motors are located right below the windsheld and above hood. you probably have to undo the louvers where the windshield wiper arms are located and it sits in front of the driver side not too bad to swap yourself part itself is about $60 w/old motor turned in
×