Question about 1987 Buick Regal

1 Answer

What is the Wire Order with distributor? - 1987 Buick Regal

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Buick Master
  • 22,408 Answers

Theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Posted on Aug 15, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order for 1982 351w in f150 truck


If it's a California truck it's a good chance the ignition is EEC-III (brown grommet on ignition module.)

The EEC-III distributor rotor fires alternately from both sides of the distributor rotor.

The the spark plug wires for an EEC-III distributor will be wired counter clock-wise in a different order.

351w firing order, CCW: 1-3-7-2-6-5-4-8
351w wire order, CCW: 1-5-7-8-6-3-4-2

Sep 01, 2014 | Ford F-150 Cars & Trucks

1 Answer

Spark plugs and wires


It sounds like the spark plug wires are not plugged into the correct place on the distrubutor. take the distributor cap off and crank the engine over. Make a note of which direction the rotor spins. (Clockwise, or Counterclockwise) then find the firing order for that engine. Sometimes the firing order is on the intake manifold. (if you tell me which engine it has, the 4 cylinder 2.0, or the 6 cylinder 2.5; I could post you the firing order). Now on the distributor cap there is one wire post that has the #1 on it, that would be where you put the spark plug wire from cylinder 1. Following the rotation of the distributor rotor, you would put the spark plug wire for the next cylinder in the firing order after the #1 wire, and so on.

Dec 11, 2011 | 1998 Ford Contour

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

My car will not start


Back trace what you did. You may have unplugged something and forget to re-connect it. You mean the distributor cap,,,,, or the ENTIRE distributor???? If the later, then you must be 180 degrees off.

Jan 20, 2010 | 1992 Lexus ES

1 Answer

Change plugs and wire and engine will not acclerate. This is a built 350 short block chevy with pro charger.


350 Chevy engine in what? 1990 Corvette? Who built it, did you?

Sounds as though you have plug wires wrong.
Firing order is 1-8-4-3-6-5-7-2

Distributor Ignition System:
Distributor rotates Clockwise. (Rotor)
Find Number 1 tower on distributor cap, go Clockwise with Firing Order.

Distributorless Ignition System:
VIEWING the engine from the Front of the car.

Spark plug wire connections along the back, starting from Left side going to Right side;
2-3-7-4

Spark plug wire connection towards the Front of the engine;
6-1-5-8

(To guess I would say you have 5 and 7 wires switched)

Left side cylinder order is 1-3-5-7, going from front to back.
Drivers side is Left side.
Right side cylinder order is 2-4-6-8, going from front to back.

Oct 13, 2009 | 1990 Chevrolet Corvette

1 Answer

1984 pontiac bonnerville plug firing order photo


Hi,
I don't know your engine size, but the link below is a picture of the GM small block firing order with distributor.
The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.

http://www.classiccarauto.com/impala/how_to/images/distributor.png

Hope this helps...

Aug 27, 2009 | 1984 Pontiac Bonneville

1 Answer

Need firing order and placement of first wire on cap


If you have the 3 cylinder engine, the firing order is 1/3/2. The distributor rotation is counter-clockwise looking at it from above, and the #1 spark plug wire goes on the distributor pin closest to the driver side fender.
If you have the 4 cylinder engine, the firing order is 1/3/4/2. The distributor rotation is also counter-clockwise, and the #1 wire goes on the distributor pin closest to the front passenger headlight.
Hope this helps!

Jul 20, 2009 | 1997 Geo Metro

2 Answers

5.2 liter V8 plug wire order on engine and distributor


Firing order 1-8-4-3-6-5-7-2 Distributor rotates clockwise.  2-4-6-8 front of vehicle 1-3-5-7 rear

May 18, 2009 | 1999 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

959 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...