Cars & Trucks Logo

Related Topics:

Carlos E. Jaimez Posted on Jul 30, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Working in a mazda mpv 2001, i cant find the ignition control unit, when i look for the part on ebay they sell the part as: ECU-ECM-PCM, question: is the ignition control unit inside the ECU-ECM-PCM?

No power to the cranksahft and camsahft position sensor and no start. and i think is the ignition control module or the pcm.

2 Answers

Robert Wood

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mazda Master 6,139 Answers
  • Posted on Jul 30, 2015
Robert Wood
Mazda Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Oct 21, 2014
Answers
6139
Questions
3
Helped
1188304
Points
20137

montehammons

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mazda Master 5,531 Answers
  • Posted on Jul 30, 2015
montehammons
Mazda Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 14, 2011
Answers
5531
Questions
2
Helped
1642944
Points
17401

It appears from a wiring diagram that there is no ignition control module. The ignition coils' primary circuits are grounded through the PCM. And the wires to the sensors are all from the PCM.

Here is a link if you want to see all your wiring diagrams. I found the above information under System: engine; Subsystem: fuel controls.

Free wiring diagrams and TSB's for every make and model:
http://www.bbbind.com/technical.html

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where is ecm on a 01 santa fe also the pcm?

2001 Hyundai Santa Fe , S.Korean car,
no country told (you ) or what engine is there, gas/diesel and displacement (size)
the classic easter egg hunt, (it's not bad leave it be)
post problems first
check fuses and scan the PCM, obd2, usa scan tool if is USA>?


2.7L V6 - Gas <<< this? answering for only this ME (guessing engine) or 2.4L?
2001-2003 Hyundai Santa Fe - ECM - Hyundai

ECM. ELECTRONIC CONTROL UNIT. Engine Control Module.

Stock Code??? 3912138170 This part is compatible with 1 vehicle(s) matching 2001 Hyundai Santa Fe LX Sport Utility 5-Door 2.7L 2656CC V6 GAS DOHC Naturally Aspirated. and must be programmed before use. (new /used , replaced)

this

https://youtu.be/19Jl0c8wXeg

i hear folks had HVAC leak water to the ECU below and wrecked it.
super bad location that.

and this

https://www.justanswer.com/hyundai/6l5lk-hyundai-santa-fe-change-ecu-2003-hyundai-santa.html


the car may have
BCM, body.
PCM (TCM + ECM = PCM) SEEN ON NEVER CARS.
ECU/ECM,, BINGO?
TCM transmission
ABS
HVAC BRAIN BOX
AND MORE, (SEE SERVICE MANUAL FOR ALL THAT)
0helpful
1answer

1998 mazda mpv transmission control module

TCU transmsision were combined with the ECU

referb or used ..ebay

need to find same year ,same engine and transmission

26333219-lrdjrb3ml5l2vpn3r2iskem5-3-0.jpg

26333219-lrdjrb3ml5l2vpn3r2iskem5-3-1.jpg
1helpful
1answer

Where is located the ground wire on mazda mpv 2001?

Your ground wire connection for the OBD2 connector is located under the dash just below and to the right of the heater controls. More likely that you dont have power to the connector. Check the 10 amp "ROOM" fuse in under dash fuse box.
0helpful
1answer

First can i replace an ignition control mod u le from my 92 mustang with one from a 93 contour

nope doesnt work that way on EFI engine setups

this link may help http://www.ebay.com/bhp/ford-ecu

see compatabiltiy list ..for the right one ....only mustangs
http://www.ebay.com/itm/1986-2001-Mustang-Engine-Computer-ECM-ECU-Repair-Return-A9L-A9P-/221564555045?fits=Make%3AFord#vi-ilComp

has to be the same ECU controller by model years / same engine mustang

if you try the contour ECU without the wires connected you might cause more faults
0helpful
2answers

Can I get a computer module ECM for 2002 Nissan pathfinder manual transmission

get it from nissan parts store or get a good unit from the wreckers
there are companies that rebuild ECM units so find them in the yellow pages
1helpful
1answer

Am working in a mazda mpv 2001, i think the problem is the pcm-ecu-ecm, ebay repaired for around 200 and they need the vin number, is this the only part for my van? or can i get one in the yank yard?

If you are sure the computer is the problem... remove the original one and it will have a tag on it with part numbers. Find one at a salvage yard and compare part numbers to make sure they are the same and it should work. The only thing that may cause issues is if the vehicle has a security system and a relearn/reprogram may be required
0helpful
1answer

Why wount my mazda626 fuel pump relay and spark ni the engine

I know this is an old post but if you replace an ecu, pcm or ecm in a mazda it needs to be reflashed(reprogrammed). I am going through this right now but come to find out nothing was wrong with my pcm it just has a wiring issue or so i think! hope this helps others that may be looking.
10helpful
3answers

Program remote control for mazda mpv 2002

Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done
0helpful
1answer

Looking for location of ECM

Hope this helps

UPLANDER 06 Elec Cont Unit (ECU); (left front of engine compartment), 3.5L
.
moz-screenshot.jpghttp://cgi.ebay.com/ebaymotors/2006-Chevy-Uplander-Engine-Computer-PCM-ECM-12600928_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem320315289651QQitemZ320315289651QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Not finding what you are looking for?

483 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...