Anyone know torque spec for coolant temp sensor in 2007 Chrysler Town&Country lx 3.3

SOURCE: 2007 Chrysler TOWN AND COUNTRY.. OVRHEAD MAP

I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.

SOURCE: I have a 1997 chrysler town and country lx my

If the cable is not broke at the hood release handle check at the grill but look closely the other end may have come off its position not allowing it to unlatch. I worked on one that it happened to.

SOURCE: I have a 2007 Chrysler Town and Country overhead mamap lite

I very gently pried on the outer curve of the clear cover. It snapped out easily. Then I noticed it only clips in to place on the left and right side of the widest part of the cover. I was then able to simply twist the bulbs out socket and all.

SOURCE: 2003 chrysler town and country trans pan torque

15 ft-lbs

SOURCE: 1998 chrysler town and country coolant pouring out...

Check for leak at the coolant tube that runs under the intake, possible bad o-ring, the intake will need to come of for inspection and repairs.