At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, The fuse panel is under the left side of the instrument panel on the interior and they are labels on the fuse panel cover. It's a 20A fuse.
BUT - Do the wipers work? If yes, it's not the fuse because the same fuse controls the pump and the wiper motor. If no, it is probably the washer pump itself.
Disconnect socket going into washer pump.Check to see if the power supply at pump is there by testing with a circuit tester. Pull back on wiper washer switch to perform this.If you have power its the pump.
Can you hear the pump working when you try to wash? If no, check for voltage at the pump (usually located under the washer reservoir). If there is voltage but pump doesn't operate, replace pump. If no voltage, check fuse or problem is switch in steering column.
OK THESE IS PRETTY EASY
1 CHECK POWER AT WINDSHEILD WASHER RES MOTOR IT IS GOING TO TAKE TWO PEOPLE HAVE THEM TRY IT AS YOU CHECK FOR POWER WITH A VOLTAGE LIGHT. IF NO POWER CHECK FUSE IF POWER 12V IS THERE REPLACE MOTOR. THE MOTOR IS AT THE BOTTOM OF THE TANK WHERE YOU PUT THE WINDSHIELD WASHER FLUID IN
I assume that you are talking about the windshield washer pump. The fuse for the washer pump is the same as the wiper fuse; they share the same fuse. If your wipers work, and your pump does not, you ned to order a washer pump and replace it. Easy to do; just unbolt the bottle, raise it up, yank off the old pump and pop the new pump on.
Turn your car to acesories and turn washer on, have someone listen for the washer motor running, if they dont hear it could be a bad motor or fuse. If they do hear it then remove hose from washer nozzles and turn on washer, see if there is any fluid coming out, if there is then your nozzles may be stopped up, if not hose is stopped up. Try blowing hose back towards tank to open it up
×