2004 Chevrolet Venture Passanger Logo

Related Topics:

c
carole Posted on Jul 16, 2015

Can i use another pass key 3 from another chevy venture

Can i use a pass key 3 from another chevrolet venture

5 Related Answers

Anonymous

  • 362 Answers
  • Posted on Jan 29, 2009

SOURCE: reset the computer system of 2001 chevy venture

Is the check engine light on? If it is you will need a code reader to plug into the OBDII port under the dash near the steering column. But that may not keep the light off. Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and your car needs to be repaired. Hope this helps.

Ad

Anonymous

  • 840 Answers
  • Posted on Feb 02, 2009

SOURCE: need wiring dig. for 2005 chevy venture window switch

call any gm parts dept they can print one up for you just give them your vin Please rate my response thank you very much

Anonymous

  • 1 Answer
  • Posted on May 03, 2009

SOURCE: Need to replace the air filter on my 2001 Chevrolet Venture

It's hard to get to it's on top but very tightly together goodluck

Anonymous

  • 314 Answers
  • Posted on Jun 15, 2009

SOURCE: 1998 chevy venture stumbles when you accelerate

check the throttle position sensor and also check for air intake leaks at the throttle body

Anonymous

  • 1206 Answers
  • Posted on Jan 27, 2010

SOURCE: My keys are locked inside my 2000 chevrolet venture, Is

call onstar!!! just kidding no! the only way now is to use a slim jim(door opening tool) most auto parts sell them for 5 dollars or so unless you have AAA auto club card or know a member they will come out and do it for free sometimes police officers can also help you. hope this helps you.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

2000 chevy venture won't crank with key

The pk3 system has a sensor ring around the lock cylinder these go bad a relearn will not fix this because no security code is being sent to the pass key module.
0helpful
1answer

The chevy venture i replaced the pass key in has the PK3 key and i cant get it to start

The module may have failed.
The module reads the chip in the key thru the sensor in the lock cylinder.
0helpful
1answer

How do you know what size window you need for a 1999 chevy venture rear (P) window

You dont need to know the size, window go by the year ,make and model and what glass, so you would tell them the same info you just gave me, 1999 chevy venture rear window pass /side,
0helpful
1answer

2001 chevy venture van and i cannot turn the key

While turning the key rotate the steering wheel left and right. If there is too much tension on the parking lock the key cannot be turned.
1helpful
1answer

1998 chevy venture stumbles when you accelerate

check the throttle position sensor and also check for air intake leaks at the throttle body
1helpful
1answer

Need wiring dig. for 2005 chevy venture window switch

call any gm parts dept they can print one up for you just give them your vin Please rate my response thank you very much
5helpful
1answer

Program master key for 2000 chevy venture

To program a new key...
1-Turn ON the ignition, with the engine OFF, using a master Pass-Key III key (black).

2-Observe the security telltale. After approximately 10 minutes the telltale will turn off.

3-Turn OFF the ignition, and wait 5 seconds.

4-Repeat step 1-3 two more times, for a total of 3 cycles or 30 minutes.
Tech JK
-----------------------------------------------
0helpful
1answer

Blower fan

it sounds to me like your blower moter resister or your blower moter switch are going bad both are right under the hood next to the blower moter one has 2 witers on it the other has 4 it usuley on the pass side right near the window
0helpful
1answer

2001 chevy venture lost key

You must get a new key from the dealer. Bring in the registration, and photo I.D. Then they will cut you a key. After that, try this procedure....
  1. With a master passkey III key (Black), turn ON the ignition, with the engine OFF.
  2. Observe the Security telltale, after approximately 10 minutes the telltale will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  6. If it does not work, you will need to get it to the dealer.
GM technicians on-line
Not finding what you are looking for?

99 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...