What size belt do I need to bypass ac on 95 Chevy pickup

SOURCE: bypassing air compressor in a chevy 95 g20 van

Well if you're trying to bypass the air conditioning compressor, your original serpentine belt will obviously not work as it will be too long. Installing another pulley would really be more work that it's worth and likely cost a fair amount since you'd have to have a custom bracket made, or a mount to fit in place of the compressor. Your best bet would be to have your local parts supply look up the belt for the same make, model, year and engine specs as your vehicle but without Air Conditioning. The g20 uses all the same mounting locations for other belt driven accessories regardless of the presence of an AC compressor. Therefore, the belt should fit just fine. Also, you should spot on the belt routing diagram under the hood that it shows the optional routing for a belt without AC. (It does on mine anyway) Good luck and let me know how it goes.

SOURCE: need to bypass ac compressor on a1997 chevy lumina 3.1l

I doubt anyone knows that off the top of their head. You could run a string through the path you want the belt to take and measure how much string it takes. This will give you an approximate length for the belt -- most parts stores could find one close to that size.

SOURCE: what size belt bypasses ac compressor on 2001 ford

I just went threw the same thing. I found that Auto Zone's 822K6 belt fit perfectly. Hope this helps you

SOURCE: I need instructions and a diagram to bypass the ac

simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.

SOURCE: can i put on a shorter serpentine belt to by pass

When you go to the Auto parts store and get the part. Tell them you don't have AC and install that belt by passing the AC pulley.