Question about Hyundai Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
A word to the wise... replace the O2 snsr as well.
Posted on Oct 04, 2009
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
Posted on Feb 21, 2010
The CPS for these motors is located in the front of the engine and the the timing belt cover needs to be removed to gain access. If you need further instructions on removal as well as diagrams, email me at email@example.com and I will send those immediately.
Posted on Jul 13, 2010
My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.
-- begine excerpt from 2000 Hyundai Sonata Repair guide --
The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.
--- end excerpt from 2000 Hyundai Sonata repai guide ---
Posted on Jan 02, 2011
Tips for a great answer:
Jan 22, 2018 | Hyundai Cars & Trucks
Oct 21, 2014 | Cars & Trucks
Dec 29, 2010 | 2000 Hyundai Sonata
Jul 13, 2010 | 1999 Hyundai Sonata
Mar 27, 2010 | Hyundai Motor 2004 Sonata
Feb 21, 2010 | 2000 Hyundai Sonata
Sep 24, 2009 | 2000 Hyundai Sonata
Jul 28, 2009 | 2000 Hyundai Sonata
Jun 13, 2009 | 2000 Hyundai Sonata
418 people viewed this question
Usually answered in minutes!