Here is a link to a page simular. DTC P0335 How To Change Honda Accord Crankshaft Position Sensor also you can ask auto parts store, they can help sometimes. Go on ebay an search part, many times the pic where it goes an part shown is there
SOURCE: Replace crankshaft position sensor
Remove the left front wheel....(drivers side). Remove all accessory belts. Remove the crankshaft shaft pulley.......remove the plastic lower timing belt cover.....and there it is! It is mounted with one bolt.
The wiring runs down the right side of the timing cover while looking at it from the drivers side of the car.
Testimonial: "I ended up having my mechanic do the work. He did say he had to move all those parts to get to the sensor. "
SOURCE: 97 Astro crankshaft position sensor
HI..
Tha crank position sensor On your astro is located.
On front of the engine on timing cover, left side.
Behind the crankshaft pulley. with a connector of 3 wires.
I hope this work for you.
SOURCE: 1996 HONDA ACCORD CRANKSHAFT SENSOR AND CAMSHAFT SENSOR.
befor in the ealier models of accords they use to be both the cam and crank sensors in the distibutor but they separated them !!!So no they are not together on your car tha cam sensor is in the distributor and the crank sensor is in front of engine or in the lower timing belt cover if it is in the timing cover you can see a wire going dow the timing cover way to the bottom on the rear side off it
hope it will help you if you have any question just wright back !!!!
Denis
SOURCE: which o2 sensor do i change with a p0141 code
O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
SOURCE: location of speed sensor on 97 honda accord
1997 Honda Civic 1.6L MFI VTEC SOHC 4cyl
The Vehicle Speed Sensor & Sensor - Transmission Speed is located mounted on transmission.
Also, here you can find several 1997 Service Honda Civic documents.
Hope helped with this (remember rated this help) Good luck.
702 views
Usually answered in minutes!
×