Where to find the camshaft sensor on the 2005 Suzuki Forenza?

Hello Rod, your Camshaft position sensor will be located on the engine, usually around the accessory drive pulleys. Your local Auto parts retailer will be able to provide a accurate drawing detailing the location and wiring colors.

Has the timing belt been replaced per manufacturers recommendations? A loose/worn timing belt will cause cam lash and that can generate a fault code. Also i need the exact code as there are more than one for the sensor in question.

• Hear are the timing marks fora a 2005 Suzuki Forenza 2.0

• Crankshaft gear to the bottom of the rear timing belt cover ----

• Camshaft gear to Camshaft cover ---

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

The Crankshaft position sensor is right behind the AC compressor. Yes you do have to remove the PS pump and compressor to have max access to the sensor. You can follow the connector cable down to the sensor. These type sensors are normally pretty sturdy and the problem more times than not is in the wiring or connectors.

You will need to splice in the universal ones.

Well, you know where the camshaft is..right? then look in that area for a sensor.

THE EASIEST WAY IS TO GO TO YOUR LOCAL AUTO RETAILER AND BUY THE REPAIR MANUAL FOR THAT VEHICLE. PAY A BODYSHOP FOR THE INSTRUCTION

I had a camshaft sensor replace in my 2004 suzuki forenza and now i have a leak now so tell me what they do wrong