I have a 1993 Suzuki swift 5 speed. My son hit a dip in road hard it killed motor. Unable to pop the clutch

SOURCE: Suzuki swift Headlight problem

Have you checked to see if this is a wiring problem or maybe a relay problem?

Recently my lights would work on side lights and not anything else and this was down to dodgy wiring and needed a new relay unit.

Dave C

• 1050 Answers
• Posted on Mar 19, 2009

SOURCE: I need a diagram of the timing marks on 1993

That should do it if you need a bigger one, let me know.

SOURCE: Creaking Noise in Front Axel when going over speed bumps/dips in road

My grandfather has a 97 Ford Crown Vic that used to do the same thing. He had the front end greased when he got an oil change and that solved the problem. So thats probably all you need.

SOURCE: How hard is it to rebuild an 86 Suzuki Samurai 5

ITS NOT A HARD JOB. BUT YOU HAVE TO BE CAREFUL.YOU ARE WORKING UNDER A CAR. BESURE TO USE JACK STANDS .YOU NEED A REPAIR MANUAL.IT SHOW YOU HOW TO REMOVE TRANSMISSION.YOU HAVE TO SUPPORT ENGINE WHEN MOVING TRANNY.REBUILT KITS.WILL HAVE ALL GASKETS SEALS AND BEARINGS.BUT MAJOR PARTS YOU HAVE TO BUY THEM SEPERATE.LIKE SHIFT FORK COUNTERSHAFT AND SYNCHRONIZERS.NOW THE CLUTCH KIT IT WILL HAVE CLUTCH PRESSURE PLATE AND CLUTCH RELEASE BEARING.BESURE WHEN YOU BUY KIT MAKE SURE CHECK IT.MAKE SURE IT HAS EVERYTHING YOU NEED.

SOURCE: i bought a brand new 2007 suzuki swift,it has only.2007 SWIFT

i would say its wear and tear,you can kill a clutch in a day if your hard on it,,,or it could take 150,000 miles,,suzuki will classify that as a wear and tear item,,they are really tight with that stuff,