SOURCE: How do I replace the battery in a 2004 Chrysler Concorde
Hi its pretty straight forward First remove the positive lead + then the negative - undo the battery cradle ( the bit holding the battery in place) reverse these instructions for reconnected job done
Hope this helps
Avoid = when undoing the positive lead + make sure the spanner doesnt contact any other metal component also make sure you reconnect the leads the correct way around + to + and - to -
Regards Steve
That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.
SOURCE: chrysler concord brake lights stay on
Switch is located under the dash and is either on the brake pedal or inline with the brakepedal... either has a clip or is screwed in...
get ready to stand on your head...
SOURCE: HOW DO I CHANGE THE BATTERY IN MY 2001 CHRYSLER CONCORDE?
You will need to disengage the Negative terminal (Black side) and then the Red (positive side). In addition, there might be a securing bracket with two bolts or wing nuts, loosen these and the rods can be pushed down and twist out of the bottom. Once this is done remove the battery and head to your local Auto parts store, they can help you select the correct one. re-assemble as you have taken apart. you will need to re program your stereo and reset your clock, (prior to removing terminals) make sure there are no special lock out codes for your stereo. Good luck!
SOURCE: stopped running while driving
i would first check the crank position sensor,i have seen this many times before.
268 views
Usually answered in minutes!
×