Corrosion to sensor connectors causes bad behavior. Most likely temperature sensor for engine block sensor to ECU computer has corrosion. Clean connectors and spades to bright metal. Should be two lines/ connectors. Many other sensors could have a similar effect, or soon will have.
SOURCE: 1995 nissan pulsar wont run properly
What your smelling fuel for is the fact that once you start it your flooding the **** out of it.. your fuel relese valve needs to be closed up a bit, your intake for fuel is to high basically, this can and will happen due to racing, vibration, or just over time. Its one of those problems that occurs now and then, it is a simple fix!!
SOURCE: flooding/shutting off/black smoke/harder on gas
Sounds to me like you have a bad coolant temperature sensor. Or a bad o2 sensor. Leaning towards the coolant temp. sensor. I hope that I helped. Best wishes.
SOURCE: have a 1996 rangerover will start but when placed in gear wont
check the fuse box under the seat.....i forget with fuse it is but if its missing or blown......the truck will not move...happen to m e
SOURCE: rangerover 3.0 td6 2003 poor starting when hot
secondary fuel pump under ns nr tank will cause poor hot start if pressure delivery is low.
123 views
Usually answered in minutes!
Truck starts fine as long as not on encline
×