What 4.6 will interchanges fit on a 97 Seville vin. Y

According to Hollander interchange, 1997 is a year by itself that doesn't interchange with any other year. And a 2001 and 2002 interchange with eachother. They don't specify what the difference is, but just that they are not a direct interchange. My guess would be in the electronics and controlls.

automatic or stick mine was STICK
4wd or not, , we can not guess drive-trains, ever. why not post VIN?
the pickup with odd name,had one, super long ago. 86:(4wd+v6)
Ask Nissan this?
or any tranny rebuilder this? they all know this.
it has to fit
and not make the PCM/TCM go NUTz
if it fits and has all the wrong RATIO gears, the PCM will go completely nuts. b
but is not a Ebox at all.
(97 cars some had TCM and electronic full box shifting.
one has
RL4R01A is a what,? llets look it up googling, easy;

RL4R01A transmission is currently found in Nissan Pathfinders, 300ZX, 240SX, Mazda MPV's, B2200 and B2600i vehicles. Also the Infinity J30, M30, and Subaru Legacy vehicles have similar units.
RL is pure hydra matic
REL is electroncs
so you luck out on TCM there is no TCM here at all
so is more swap worthy.
the problem huge is, 4wd
and transmssions can have mounts very differnet,
even the bell can different from I4 to I6 or even for other brands of cars. learn to ask rebuilder this. they sure know this and it is complex.
for all I said here and lots more
some are setup for 3 or 4 different 4wd transfer case
SEE?
dont ask on the web lacking full VIN,.(unless lies are fun)???????
not told full spec on the 2 cars, that makes this impossible all.
not rold is this old to new or new to old.
so post what car is the target car, not told.
or not use interchange word at all say SWAP from X and To y
sorry that is the best I can do with little facts told.

Eldorado parts won't fit. Have you tried getting a whole front clip from a junk yard?. There are body parts online stores you can try too Cadillac Car Truck Body Parts See if this place has what you need.

call or notify a bone/junk yard they have the cross reference charts for vehicle parts or try a gm dealer these are a few that are compatible 97-99 Pontiac Bonneville SE 6Cyl 3.8L 231CID VIN K Fit Note Engine VIN: K, Naturally Aspirated 97-99 Pontiac Bonneville SSE 6Cyl 3.8L 231CID VIN K Fit Note Engine VIN: K, Naturally Aspirated 98-99 Buick LeSabre ALL ALL 97 Buick LeSabre ALL ALL Fit Note With Harness Codes: HEN, HER 97-99 Oldsmobile 88 ALL ALL 97-99 Oldsmobile LSS ALL ALL Fit Note Engine VIN: K, Naturally Aspirated 97-98 Oldsmobile Regency ALL ALL

No 98-04 only

Well there are several 3.8 liter engines 8th digit in the vin tells it all Vin3,C,K,L are all different is small settle ways the most is ignition electronics Vin 3 engines only use the inner sensor ring on crank pulley Vin 3, c,k,l use both sensor rings but they are different also Changing the pulley is not recommended due to balance issues but the sensor rings are bolted on with sheer bolts that can be removed. Intake manifold design is the second most important plastic 2 piece and metal one piece are not inter change able.

Most likely yes it will. Junk yards are a great source for that information simply call your local junk yard and they will tell you if it will fit ie mounts etc.

No.
An auto parts store can tell you for sure, but my book shows that alternator fitting 1996-1998 V6 models.

Improve the FixYa experience for everyone by voting. I want you to let me know if the solution(s) suggested were of any value. Constructive criticism is welcomed.

Hi,

I'm Ben and -- hopefully -- I can provide some meaningful assistance.
Sorry but the answer is no.

1991/1992 Part #REPB314517 Fits the following 1990-1992 Cadillac Seville submodels:

1991-1992: Base; 8 Cyl 4.9L; "FI, Naturally Aspirated, VIN B"
1991-1992: STS; 8 Cyl 4.9L; "FI, Naturally Aspirated, VIN B"

1994/1996 Part #E3913M Fits the following 1994-1996 Cadillac Seville submodels:

1994-1996: SLS; 8 Cyl 4.6L; "FI, Naturally Aspirated, VIN Y"
1994-1996: STS; 8 Cyl 4.6L; "FI, Naturally Aspirated, VIN 9

No...the 96-97 don't interchange with the 98-00....and even some of the 98 parts (the tranny for instance) don't fit on the 2000.

Type the part into this website

http://www.car-part.com/index.htm

If it only comes up in the 96-97 and not the 99, it won't fit.