SOURCE: manual clutch
Sounds like the wrong pressure plate. I got a kit from Autozone and it was the wrong pressure plate. My old one was obviously thicker. With the new pressure plate, the shift fork was almost at full travel before any resistance. That's no good. I had to pull the transmisssion again and use my old pressure plate. Luckily, it was in good condition. Then, the clutch slack was easily adjusted and works great.
SOURCE: 94 dodge neon auto tranny
Hi,
Here is some possible reasons why your transmission is having those problems .
* The gear shift linkage is binding
* There is an internal problem in the transmission
* The throttle cable is broken or disconnected
* The vacuum modulator on the transmission is faulty or the vacuum line is damaged
* The electronic transmission control circuit may be faulty
SOURCE: My 98 Escort ZX2 manual transmisson seems to shift gear hard!
Clutch may be smooth but this is a sign of the clutch needing replaced. Some of these models have a linkage adjustment under the hood. Others are hydrallic and need fluid. Look under the hood where the steering is and see which you have and address accordingly. Good luck. Check on costs of clutch replacement.
SOURCE: i have a 2004 mazda rx-8 6 speed manual
shift cable could be out adjustment.check shift forks unit for loosen bolts or broken missing parts.
SOURCE: My Honda CRV-2000 manual transmission does not
the clutch fluid being low means that there is a leak in the hydraulic system and that is why you cannot get the vehicle in gear. even if you refilled the resivour you still need to fix where the leak is coming from then manually bleed out any air in the system. air is compressable and liquid is not. if there is air in the system you are only compessing the air when you push the clutch down and it is not pushing the clutch. check the clutch master cylinder for leaks- its under the clutch fluid. also check the slave cylinder is bolted the the transmission.
121 views
Usually answered in minutes!
×