Are you getting power to the injectors? How do you know there is no pulse? Note, the pulse is on the ground wire from the PCM. If no power, check fuses INJ and SNSR. If you have power, the PCM may be bad. Are you getting sparks? Need more info.
I have voltage at first injector. car runs on spray. all fuses are good changed can shaft sensor
As you can see from the diagram, all of the injectors are powered by the same fuse and white wire. There must be a break in the wire--probably between the #1 and #2 injectors. Recommend you trace the wire carefully. Disconnect the injectors, and pull the connectors to stress the wire and see where it gives. Probably need to splice in a new wire.
×
1,981 views
Usually answered in minutes!
I only have 12 volts on injector one. Nothing on others. It runs on spray. New can sensor.
×