Question about 2001 Lincoln LS
Michael: You may be having two separate problems. One owner says fuse # 20 operates the cigarette lighter. Usually when your car will not go in reverse, there is a problem with the transmission.
Posted on May 25, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On the passenger side, under the dash, on the right side if you are looking at the dash. There is another one in the trunk next to battery. There is a third one under the hood behind the right headlight.
Posted on Nov 10, 2008
SOURCE: Radio fuse keeps blowing out
Posted on Jan 02, 2009
when you replaced the battery it was very possible that you may have blown a fuse. Check your fuses for your radio and your cig lighter.
Posted on May 27, 2009
it is doubtful the horn fuse is the problem, it is more likely the clock spring contact under the steering wheel, the fuse for the horn is located in the underhood fuse box,
Fuse #4 15A* Horn
Posted on Sep 30, 2009
I would trace the wire from the horn and see if it was inadvertently damaged when the alternator was installed. If you have a voltmeter, you can remove the horn fuse and check to see if there is continuity between the horn (non hot side) of the fuse and the car body. This would indicate a short in the wire running from the fuse box to the horn. You can also look around the alternator mounting area to see if any wires are being pinched. Hope this helps. Good luck!
Posted on Mar 10, 2010
Tips for a great answer:
May 29, 2011 | 2002 Lincoln LS
Sep 30, 2009 | 2002 Lincoln LS
Aug 13, 2009 | 2000 Lincoln LS
May 17, 2009 | 2000 Lincoln LS
Jan 02, 2009 | 2001 Lincoln LS
Nov 10, 2008 | 2000 Lincoln LS
Oct 23, 2008 | 2001 Lincoln LS
137 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: