PROBLEM CODES;P0301,P0302,P0304,P0300,P1399,07-02,09-02,07-03 CarMD error codes, what do they mean

These numbers are OBD codes. They are misfire coding.
There is a youtube video to assist with troubleshooting.
Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

Good luck.
Semper Fi,
Z

the p0300--p0301-p0302=p0303 are misfire codes and can mean needs tune up or wiring problem and p0171 is system to lean bank 1 with this code if you correct it will probably correct the misfire codes your receiving
http://www.obd-codes.com/p0171 Fixing Hesitating Car P0171 Code YouTube P0171 System Too Lean Bank 1

P0300-p0304 misfire on cylinder 1-4
P1399 random cylinder misfire

Try this site for misfire codes and their diagnosis:

P0308 OBD II Trouble Code

also here:

Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

and herea;

Title goes here

P0171 System Too Lean (Bank 1)
P0174 System Too Lean (Bank 2)
P0301 Cylinder #1 Misfire Detected
P0302 Cylinder #2 Misfire Detected
P0304 Cylinder #4 Misfire Detected
P0306 Cylinder #6 Misfire Detected

P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Codes po300,1,2,4.problem with tune up.plugs,wires,coils.When change with good one.

Change...distributor cap ..spark plug wires or spark plugs

Have you had somebody clear the codes after you installed the parts.If not the codes have to be erased by using a scan tool.

From www.hondasuv.com:

 

The P1399 random misfire along with one or more of these codes: P0301, P0302, P0303, P0304 -- indicates a problem with the valves. The B20 engines in the 1997-2001 CR-Vs are known to have problems with valves tightening and then 'burning'.

So the first question is when was the last time you adjusted the valves? If you don't know or never have, then have them adjusted. Soon...