Should just be mounted with a lock tab on a bracket on the manifold, just above the throttle body. One hose, one wire connector. An easy one.
SOURCE: '96 Regal Purge Canister Valve?
ADAM
THE PURGE SOLANOID IS ON THE ENGINE WITH A RED CONNECTOR ON IT. IT IS LOCATED ON THE REAR OF THE ENGINE ABOVE THE REAR VALVECOVER. YOU ARE ACTUALLY LOOKING FOR THE CANISTER VENT SOLANOID AND IT IS IN THE REAR OF THE CAR AND THEY FAIL OFTEN. GET THE PART FROM G.M. AND THEY CAN TELL YOU EXACTLY WHERE IT IS. THE G.M. PART IS UNDER $30.00.
SOURCE: locate canister purge solenoid for 2000 Buick
The evaporative canister purge valve is found between the upper intake manifold and the rear valve cover.
SOURCE: replacing power steering pump in a 95 buick regal
i think you need to remove pully first it is a special puller gm has
SOURCE: How do I replace a starter in a 2000 Buick regal
The starter is on the underside of the transmission, there are wires feeding the solenoid (remove) 3 starter bolts (remove) pull off transmission/flywheel
SOURCE: my 1995 buick regal won't turn over.
ive been workin on buicks for 10 years i know for sure that its the key, the gmc cars in the 90s came with a sercuity key to stop any chance of being stolen the keys cost from around 50.00$ to 80.00$ the best place to buy these would be at a buck dealership :)
1,438 views
Usually answered in minutes!
×