Check that you have coupled the connectors up correctly and not bent a pin
SOURCE: how do i replace the pcv valve on a 2000 explorer xlt v6 sohc?
On the passenger side of the intake manifold, coming off the bottom
about the center of the engine front to back, you'll feel a hose that
comes off a nipple. That hose makes a 90 degree bend and goes around to
the rear of the motor. Where that hose meets the Y-connector from the
other side of the intake you'll find the PCV valve. It's almost
impossible to see it with the hood installed, and even tougher to reach
it.
A good source of information for Ford Explorers can be found here
SOURCE: 2004 ford explorer gas pedal dosen't work even after replacing it
I had this problem too with my 2004 Explorer
Don't know if it had anything to do with it,but i had washed down the engine compartment the previous afternoon. After having it towed to the dealership they told me it was the throttle body.They replaced it and all is good
richt
SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and
I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.
SOURCE: where is engine number on a ford explorer xlt v6
The Engine code should be located on RH Side, Rear, on the Lower Crankcase.
Testimonial: "Spot on Mate. Thank you !"
SOURCE: 2002 ford explorer xlt 4x4... Vehicle won't start
My 2002 Ford Explorer have the same problem
89 views
Usually answered in minutes!
×