Cars & Trucks Logo

Related Topics:

Posted on Apr 27, 2015

Front left wheel thumps when I apply the brake pedal,replaced pads and rotor disconnected the sensor ,still vibrates

You can feel it in the pedal and hear it in the wheel , also when you are at a stop and you slowly let off the brake you can hear the right wheel releasing noise of the pads against the rotor but not the left which is the on making the noise , thanks for the help

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why is the left front tire thumping and the brake pedal vibrating when I stop

ABS thinks you are skidding, and is applying the brakes on and off. Likely one of the ABS sensors is bad.
0helpful
1answer

F250 front left wheel thumping grinding

get the pads and brake rotor cked out probably worn out.
5helpful
4answers

Steering wheel shakes at high speed when brakes are applied

This is caused by the front disk brake rotors being warped from heat and running out of true, the wobble of the warped rotors causes the wheel to shake when you apply the brakes, it is worse the higher the speed you apply them at. Have the front rotors machined flat again or just replace them.
2helpful
1answer

My car camry 2003 runs well usually but sometimes the car trembles or gives trembling noise when the brake is applied.

will try to help.your front brakes and rotors may need replacement. when you apply brakes say,at 40 mph do you feel vibration on brake pedal or shaking in steering wheel? the vibration comes from worn or warped front brake rotors. while you have those rotors replaced,go ahead and have new front brakes applied also,or else you'll still have brake problems.always ask to see old parts when you have brakes and rotors unless you have a complety trustable mechanic! the rotors will be round and silver,a very bad brake rotor will have grooves cut in it.always shop for best price at different shops to get a picture of the price for replacement! do not be afraid to ask questions! front brake pads can cost anywhere fron $20.00 to $45.00 rotors can cost $40.00 to $50.00 each there will only be 2 rotors on the front and the brakes are complete for the front,both sides,on the front. as a general rule you'll replace your front brakes twice before you'll need to replace the back brakes because most of you stopping power comes from the front brakes. and as always,if you need further assistance please contact an expert!thank you for choosing fixya.com
3helpful
2answers

Front end shakes when braking

will try to help. when front wheels shake while applying brakes and you can feel shake in steering wheel, front brakes and rotors need replacement.rotors are warped,if you replace front brake pads, it will return[shaking when you apply brakes] suggest that you replace front rotors[both] replace [both]front brake pads. cost? i would charge [brake pads cost $55.00] labor,$60.00] total $115.00 thank you for choosing fixya.com
0helpful
1answer

When applying the brakes i feel a vibration on the brake pedal but the truck has four wheel drive has been removed what is the problem

You have warped rotors. They will need to be removed and turned by a machine shop. You will need to replace the brake pads on both front wheels even if they look good.
0helpful
3answers

2007 camry brakes vibrating

Installing new brake pads on toyota camry solara 2006 front rotors and pads and rear pads. Steering wheel would shake while breaking on 50+ miles per hour speeds. All fixed now.
5helpful
4answers

THUMPING AND PULSING WHEN BRAKING. WE HAVE CHECKED ALL BRAKES , ROTORS, CALIPERS. WHAT ELSE CAN IT BE. I AM A WOMAN, SO MY EXPLANATION IS THAT IT HAS A BUMPING THUMPING VIBRATION.

on a clear road try gently applying the E brake, see if that produces the feeling, I would say either a rotor is warped (wobbled from side to side due to heat disatortion) or a drum. It is not easy to see these faults, with a wheel off you need to turn the rotor and look for the wobble, it only takes a wobble of 1/16 or 2mm to make the brake pedal pulse. This is a large safety issue as your brakes will be impaired.
1helpful
2answers

Brake pedal vibrates while braking and doesent stop right away

There's speed sensors at each wheel. You may have got some contamination in front of one of them... sounds like the abs is trying to compensate for un equal speed at each wheel... and something may be blocking a proper read at one of the wheels...
0helpful
1answer

1997 Mercury Sable thumping in front end

try to replace the wheel bearings.
Not finding what you are looking for?

163 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...