Jaguar navigatin screen not working - 2005 Jaguar S-Type

If the touch screen on your 2005 Jaguar X-Type is blank and you are receiving codes 50 and 51, it indicates that there is a communication error between the audio control module and the touch screen display.
Here are a few things you can check:

1. Wiring and connections: Check the wiring and connections leading to the touch screen display and the audio control module to make sure they are in good condition and properly connected. A loose or damaged wire can prevent the display from working correctly.
2. Audio control module: The audio control module is responsible for sending information to the touch screen display. If the module is malfunctioning or damaged, it can prevent the display from working properly. Check the module for any signs of damage or wear, and replace it if necessary.
3. Touch screen display: If the display itself is malfunctioning, it may need to be replaced. Check the display for any signs of damage or wear, and replace it if necessary.
4. Software update: There may be a software update available for the audio control module that can fix the communication issue. Check with a Jaguar dealership to see if there are any updates available for your vehicle.

Hey there i got a 1996 honda crv and i was wondering how to change the input to english so i cpyld understand how todo the navi or do i need to update it with a complete new navigatin system

On the WEB:

Front Wiper Blade Change Jaguar XJ8 (2004-2009) - 2008 ...

www.carcarekiosk.com/...Jaguar.../windshield_wiper_blade.../replace_wi...
Free video on how to replace the front windshield wiper blades in a 2008 Jaguar XJ8 L 4.2L V8. Complete instructions for changing the front wiper windshield ...

2005 Jeep Grand Cherokee Service Repair Manual INSTANT DOWNLOAD

to get solution click the link

as top gear suggest..... CALL ON THE BABY JESUS..... and yes only a main dealer can fix this as the diagnostics connect online and do software updates..... unreal annoyance but thereya go...

Hi I get ext 51 then 50 none of the buttons seem to work. I was the + Menu screen (code1971)and I seem to have an option to reset the software. Previous to this mistake the screen turn off .

Yes, so long as it is connected correctly.

Have you checked the fuses to this unit-also the relays? see the hand book for location. Next if you manage to get the push buttons to work but not the screen - try a system reset by disconecting the battery (make sure you have your radio code!) leave for 10 mins then reconect and then reload your nav cd or dvd for the screen, this may reset the screen system. Did you have a '51' message on the screen before the failure, this would point to a external temp. sensor fault which will affect the climate system.
good luck - hope this helps.

Could be your Rear ABS sensors , as that is the sensor that works for ABS and Traction control.

you can always try to remove the jet and try to blow through it or use a low pressure air line to blow rubbish out of the jet