SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
SOURCE: torque specs for 1998 tercel 1.5L
Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.
Hope this helps
SOURCE: i need too know the torque specs on head bolts and crankcam 2.4 engine
on a 2002 2.4 engine head bolts are 'torqued to distance'.
First, install all the bolts, and, in a sequential fashion, starting at
the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58
foot lbs.
Next, mark the front side of each head bolt with a dot of paint.
Retighten the cylinder head bolts 90 degrees, starting at the inner 2,
and working outward.I dont thin anything has changed on this engine since then.
Testimonial: "thanx a bunch head bolts are 12 points i need too know what size 12,13mm "
346 views
Usually answered in minutes!
×