Hyundai Motor 2002 Elantra Logo

Related Topics:

m
miguelina Posted on Apr 18, 2015

Firing order hyundai elantra 2002

Coil

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 11, 2008

SOURCE: how to install a new clutch in my 2002 hyundai elantra

Yes, I have that I was just hoping for a few details.

Ad

Anonymous

  • 165 Answers
  • Posted on Jul 07, 2009

SOURCE: firing order for hyundai elantra wagon 2000

1.3.4.2

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Aug 28, 2009

SOURCE: firing order hyundai accent 1.3 model irish car?

1.5 liter SOHC L4

f8ac140.gif

Anonymous

  • 171 Answers
  • Posted on Apr 09, 2010

SOURCE: how to replace 2002 hyundai elantra hub and bearing

With the car on ground, break loose the drive-axle nut, and the wheel nuts , than jack up the car, support it properly, remove the wheel ,remove the axle-nut.
Remove the brake caliper assembly-- support it properly.
Remove the two bolts that hold the hub bracket to the Macpherson strut assemble, remove the lower arm ball joint and remove the steering tie- rod ball-joint attached to the hub bracket. That's it.Slide off the hub /with the bracket off the drive-shaft.
Follow steps backwards to assemble back.

Anonymous

  • 1016 Answers
  • Posted on Aug 08, 2010

SOURCE: coil firing order 2001 hyundai sonata 2.5 liter v6

Here it is.

d49c233.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002

How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

0helpful
1answer

I need the firing order diagram for Hyunday Elantra 2006

autozone.com/autozone/repairguides/Hyundai-Cars-2006-2008/Firing-Orders/Firing-Orders/_/P-0996b43f80e6486f
0helpful
1answer

Hyundai elantra 2002 misfire problem while driving

are the leeds ok and the coils this also causes a miss fire
0helpful
1answer

Hyundai Elantra 1999 timing issue

It's a '99 Elantra, have you ever replaced the timing belt? It is a belt not a chaing, so it is very much should have the belt changed. After 13 years if you haven't done the belt yet now appears to be the time to change. I have an '05 and we changed it over a year now.

Good luck!!
EJ Kudelka
0helpful
1answer
0helpful
1answer
0helpful
1answer

I have a 2002 Hyundai Elantra and it backfires and check engine

if the car is back firring the timming is off, which means the timming belt might have jumped. you could have a tentioner going bad and that could be the cause or you might be do for a timming belt, for that modle car they say you should do the timming belt every 60,000. that is where i would start.
0helpful
2answers
Not finding what you are looking for?

819 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...