I have a 2004 chrysler pacifica and the radio and heat controls and my alarm stopped working. I checked the fuses and there still good.

SOURCE: 2004 chrysler pacifica

It is for an oil change mainly and any other service your maintenance manual suggests at the mileage interval. It needs to be reset after each oil change to be accurate.

SOURCE: serpentine belt routing for 2004 chrysler pacifica

here it is

Michael Kent

• 343 Answers
• Posted on Oct 02, 2010

SOURCE: Heat/air vents for defrost and feet setting not

I think your problem is mechanical. There is a distribution box behind thedash where flaps divert air to the specific locations although they may be electrically or vacuum actuated it is probably a mechanical linkage to these flaps or something is creating an obstruction. Check all the other connections while you are in there including any duct work to these areas

SOURCE: 2005 Chrysler Pacifica Washer Pump

The washer pump is located in the bottom of your windsheild washer reservoir. You will have to remove the wheel well cover to access it and check the plug in harness to make sure it is connected. Place a voltmeter on the to leads of the harness and have an assistant push the windshield washer button with ignition on. There you will see if your getting volts to the end of the harness. If you do, then the pump is bad. Replace it while you have access to it.

SOURCE: crankshaft position sensor location on 2004 chrystler pacifica

can u please tell me where on my 2004 chrysler pacifica is the crankshaft sensor located?