What exactly are you asking for. were to get one (auto parts store or dealer) or are asking for the wire colour code, were the MAP sensor is located, or how to test it and what vacuum there should be.
SOURCE: 89 Ford Ranger Carrier bearing
All the bearings for the rear diff are pressed off and on, they can be done at home if u have a high quality bearing puller, but to press them on should be done at the machine shop.
SOURCE: will '89 Ranger leaf springs fit a '99 Ford Ranger 4x4?
Measure the distance from bolt to bolt, and to the center. If they match then, they match, if not you will have to check the numbers with fords tolerances to avoid an axle wrap. But it should fit, maybe just a little stiffer of a suspension from the 4x4.
Calvin the Mobile Mechanic.
SOURCE: specs for throttle position sensor and map sensor
OBD 1 SCANNER WOULD BE THE BEST WAY TO CHECK TPS AND MAP SENSORS.BECAUSE IF THEY ARE BAD THE SCANNER WILL GIVE YOU CODE.
SOURCE: I have an 89 ford ranger 2.9 engine. The engine
Have the fuel pressure checked,and replace the fuel filter first,it is most likely one of the two causing the problem,if this was helpful,please rate,thank you.
233 views
Usually answered in minutes!
×