At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Eric, it sound to me like the modulator in the trans is faulty. This modulator is what controls the shifting in the trans.It details a 30 minmute repair by your transmission specialist. The replacement part should be around a hundred dls, plus the labor. While you are at it, have the filter changed in the trans for carefree shifting.
my beet mate will be the clutch if it goes into gear and it wont move yeh most common is blowen clutch if it is and auto cheek the trans oil level if that is ok it could be your tourqe converter both ways the gear box or trans will need to come out
Grand Cherokee many times will have a Chrysler trans (depends on engine) "regular" Cherokee usually has an AW4 unit. The difference is obvious as Chrysler one is larger and has the reverse switch located above the left rear corner of the pan...AW4 has it on the passenger side directly across from where the shift lever is on the drivers side.
If you shift to PARK position, the auto transmission (if you have one) shift to a blocked mode. The blocker is located inside the auto trans. This is a very hard piece of metal the hooks into a gear and blocks the transmission. If that part is broken, the car rolls and it takes only some drive cycles that this little item will wreck your transmission completely. If you have a manual transmission, maybe the clutch need to be replaced. You can check the clutch: accelerate fast in first or sec. gear. If the engine turns up without speed acceleration, replace the clutch.
I have a jeep wrangler and to have it towed you are suppose to put the transverecase in neutral after you first depress brake pedal put trans in neutral then start engine shift auto trans into drive release brake pedal make sure there is no movement, shut engine off with key left in acc position shift auto trans into park, disconnect neg battery cable (damage can result in trans if shifted into park while transvere case is in neutral with engine running) you should refere to your owners manuel
I had the same problem with mine you had to let off accelerator to get it to shift .I am assuming u do the same? I changed the filter and fluid and it cleared up. ???is it leaking trans fluid?
×